MEC&F Expert Engineers

Tuesday, March 28, 2017

NO DRIVING FOR OLD MEN: 9 people injured after 76-old man speeds his Lexus through red light, collides with several other cars in North Amityville, LI



NORTH AMITYVILLE, Long Island (WABC) -- Nine people were hospitalized Tuesday after an accident involving ten cars on Long Island.

The crash happened at about 12:05 p.m. at Route 110 and Bentley Street in North Amityville.

Police say a 76-year-old man, who was driving a Lexus sedan and may have suffered a medical event, sped up to a red light on Route 110.

Witnesses said the speeding car went airborne and rolled over other vehicles.

Nine people were transported with non-life-threatening injuries to three hospitals- Good Samaritan Hospital Medical Center in West Islip, Saint Josephs in Bethpage and Nassau University Medical Center in East Meadow.

There were no arrests and no summonses issued.


Old drivers must undergo mental, medical, physical and driving testing prior to having their licenses renewed.  They cause way too many accidents on the roads.

2 SUV passengers killed, driver in critical after the SUV failed to yield at a stop sign and were hit by a potentially drunk pickup truck driver near Hanford, CA




Monday, March 27, 2017 11:26PM
FRESNO, Calif. (KFSN) -- Two people are dead Monday night following a crash in Kings County, authorities said.

The crash happened on Highway 43 and Idaho Avenue near Hanford.  


Detectives said an SUV failed to yield at a stop sign and were hit by a pickup truck around 8:30 p.m.

Two people in the SUV were killed, including a 13-year-old boy, while the female driver was taken to a hospital in critical condition.

The identity of the victims has not been released, but authorities said they were from Corcoran.

Investigators say the driver of the truck may have been driving under the influence.


========

KINGS COUNTY, Calif. - The California Highway Patrol investigated the scene of a double fatal accident in Kings County Monday night. The crash happened at Highway 43 and Idaho Avenue at around 8:30PM near Hanford. 

Investigators say one of the saddest things about the accident is that it probably should not have happened. A vehicle was reportedly traveling northbound on State Route 43 at the posted speed limit.

That's when investigators say another vehicle that was traveling eastbound on Idaho failed to yield at the stop sign. The two vehicles collided. Two occupants of the SUV killed. Investigators say alcohol may have played a role.

"Alcohol is suspected on the driver of the white pickup and an officer is responding to the hospital to proceed with that investigation," said CHP Sergeant Jose Guiterrez.

The victims in the SUV are one adult male and one male teenager. The CHP says the drive of the pickup has been taken to the hospital for observation. No names have been released. Officers aren't saying what charges the driver of the pickup may face.

Two equipment demolition workers injured behind Smyrna Vehicle Assembly Plant in Tennessee






Two workers injured behind Smyrna Nissan plant
Natalie N Alund , nalund@tennessean.com 

Updated 2:40 p.m. CT March 21, 2017


Two workers were injured in an incident behind the Smyrna Vehicle Assembly Plant on Tuesday morning, authorities said.

Rutherford County EMS director Randy White said the injuries were reported at 9:39 a.m.

This incident occurred behind the plant and involved a demolition contractor, said Parul Bajaj, Nissan spokesperson.

"We are aware of the incident earlier (Tuesday) behind the Smyrna Vehicle Assembly Plant involving an equipment demolition contractor," Nissan released in a statement. "Our thoughts and prayers are with the individuals, their families and the medical personnel caring for them. We are waiting to learn additional information as authorities investigate this incident."


Worker injured at Smyrna Nissan plant dies

Smyrna Police Chief Kevin Arnold said one person was transported to Vanderbilt University Medical Center via medical helicopter and the other was taken to an area hospital by ambulance. Arnold did not know the condition of either patient.

The most recent injury involving death at the plant took place on Nov. 16 when a worker was injured and taken via medical helicopter to Vanderbilt University Medical Center in critical condition. Dennis Pinkston, 46, received a “severe crushing head injury” while checking that repairs to a conveyor belt had been successful, according to records released by the state Department of Labor and Workforce Development.

Nissan was cited and ordered to pay $29,000 by the state Department of Labor and Workforce Development in that case.




===========



SMYRNA, TN — A Nissan spokesperson confirmed that a Smyrna Vehicle Assembly Plant employee was involved in an incident Wednesday morning.

The worker was in critical condition when he was transported via Lifefight to Vanderbilt Medical Center in critical condition, said Patrick Miller with Rutherford County Emergency Medical Services.

The accident happened around 11 a.m. No further details are available.

"The employee's family members have been notified and our thoughts and prayers are with them at this time," said Parul Bajaj, Nissan spokesperson. "The safety and well-being of our team members is Nissan’s top priority."

According The DNJ's archives, the last serious accidents at the plant were in 2012 and 2013.

In June 2013, a Nissan maintenance technician was involved in a fatal accident in the body assembly area of the Smyrna vehicle assembly plant

In April 2013, an unidentified man, who worked for Nissan supplier Complete Automation, was killed when a large electrical panel fell while it was being moved.

In January 2012, contract driver Martin O'Connell of Murfreesboro was killed when he became trapped between his truck and a set of parked trailers.




========





Worker injured at Smyrna Nissan plant dies
Natalie N Alund , nalund@tennessean.com 

Updated 8:26 a.m. CT Nov. 17, 2016


A Smyrna Nissan Vehicle Assembly Plant employee critically injured in an incident on Wednesday morning has died, authorities said Thursday.

"We can confirm that a Smyrna Vehicle Assembly Plant employee was involved in an incident yesterday and transported to the hospital where he passed away," said Parul Bajaj, Nissan spokesperson, "Our thoughts and prayers are with the employee’s family during this difficult time."

The accident happened around 11 a.m. and the worker was transported via medical helicopter to Vanderbilt Medical Center in critical condition, according to Patrick Miller with Rutherford County Emergency Medical Services.

The identity of the worker was not immediately known.





DOSE MAKES THE POISON: Although mixing Borax and Elmer's Glue poses small risk, it is not zero. Prolonged exposure or digestion will cause damage











Credit: WCVB/CNN 

ROCKLAND, Mass. -- A mother in Massachusetts is warning other parents after her very-stupid young daughter was badly burned while making a popular DIY project for kids, according to WCVB.

Siobhan Quinn was excited when her daughter Kathleen became interested in making and playing with homemade "slime."

“I thought it was great. I encouraged it and bought all the stuff. And then when it was gone, I bought more. She was being a little scientist,” Quinn told WCVB.


But last weekend while Kathleen was at a sleepover, she woke up in the middle of the night in excruciating pain.

“It felt like really hot and tingly,” Kathleen said.

When Quinn picked her up the next day, she was crying in pain. She took Kathleen to Shriners Hospital where doctors determined the blisters covering her hands were actually second and third-degree burns.

Doctors told Quinn the burns were a result of prolonged exposure to Borax One, one of the main ingredients in homemade slime.

“You just have to really read the packages and know what you're mixing because there are certain things in the home that are just dangerous,” Dr. Megan Hannon said.

Kathleen is expected to make a full recovery.  Hopefully her brain has developed few cells, warning against playing with over-the-counter chemicals.



Stick to masturbation.  It is fun and will not burn your hands.
=========


Girl suffers third-degree burns making popular DIY project for kid

ROCKLAND, MA – A mother in Massachusetts is warning other parents after her young daughter was badly burned while making a popular DIY project for kids, WCVB reports.

In this day in age when so many children are glued to electronics, Siobhan Quinn was excited when her daughter Kathleen became interested in making and playing with homemade slime.

“I thought it was great. I encouraged it and bought all the stuff. And then when it was gone, I bought more. She was being a little scientist,” Quinn told WCVB.

But last weekend while Kathleen was at a sleepover, she woke up in the middle of the night in excruciating pain.

“It felt like really hot and tingly,” Kathleen said.

When Quinn picked her up the next day, she was crying in pain. She took Kathleen to Shriners Hospital where doctors determined the blisters covering her hands were actually second and third-degree burns. Doctors believe it’s the result of prolonged exposure to Borax One, one of the main ingredients in homemade slime.

“You just have to really read the packages and know what you’re mixing because there are certain things in the home that are just dangerous,” Dr. Megan Hannon said.

Quinn hopes this message will resonate with other mothers.

“I’ve had other mothers say, ‘Oh, we’ve made it a million times. It’s fine. Nothing happened to my child.’ We made it a million times, too,” Quinn said.

Kathleen is recovering, but she’s missed a week of school and has to sleep with her hands in splints.





=======


When I was a kid, I remember covering my hands in Elmer’s glue, waiting for it to dry and then peeling it off. Simpler times, I suppose (for stupid kids). But it seems that Elmer’s glue is popular with kids again for something called homemade slime.

According to the news, homemade slime is the latest Internet DIY trend - our kids are getting brainless by the day, messing with chemicals. It involves mixing white glue with water and Borax to make a squishy, stretchy, jiggly blob. It certainly looks fun, but is it safe?

Borax is a natural chemical that is found in a host of household products, including laundry detergent additives, cleaners, insect killers, herbicides and even some kinds of toothpaste. But just because it’s natural doesn’t mean it’s safe — there’s a reason it’s used to kill cockroaches. 


Consider the risks

Borax can be lethal if ingested — less than 5 grams for a child and between 15-20 grams for an adult. Signs of exposure include red and peeling skin, seizures and kidney failure. Borax can also cause skin, eye or respiratory irritation. In rare cases, prolonged exposure can cause infertility or damage to an unborn child.

Now, the amount of Borax used in most homemade slime recipes is small (usually about a tablespoon, which is a little more than 14 grams) and it is diluted in water and glue. So, while the risk may be small, it’s not zero.

I’ve also seen some fans of homemade slime saying how it’s not meant to be eaten. That’s true, of course, but as any parent can tell you, when it comes to small children “not meant to be eaten” doesn’t mean much. I would urge parents to carefully consider the risks involved before making homemade slime.

In my mind, the biggest risk is in the making of the slime. You don’t want to leave your kids unattended with a box of Borax. So, if you do decide you want to try it, I’d definitely encourage you to make it with your kids. Once it’s made, the Borax is diluted enough where I wouldn’t have much concern about kids playing with it. Then, of course, put the Borax safely away with any other toxic household items.

That said, whether it’s homemade slime or something else, if your child does ingest any potentially toxic substance, call 911 or the Wisconsin Poison Center (1-800-222-1222) immediately.

A man was electrocuted to death by a downed 115,000-Volt power line near Mountain View Diner in Gold Bar, Washington


























GOLD BAR, WA — A man died after he came in contact with a downed power line in Gold Bar, WA on Monday evening.

People in the Mountain View Diner along Croft Avenue heard a loud noise around 5:45 p.m. They went outside and found a man lying near the train tracks behind the restaurant.

“It was a freak accident. Somehow the power line broke off. It’s not windy,” said Chief Eric Andrews with Fire District 26.

It’s unknown whether the line had fallen on the man or if he approached a downed line, Andrews said.

If a power line is on the ground, people should stay at least 60 feet away until the power is cut, he said. Anyone within 60 feet could be electrocuted.

All trains were stopped until the Snohomish County Public Utility District could turn off the power. The Snohomish County Medical Examiner is expected to release the man’s identify.

No additional information was available Monday evening.



==============



GOLD BAR, Wash. — A man was electrocuted by a downed power line near Mountain View Diner in Gold Bar, Washington Monday evening.

Patrons told Snohomish County firefighters that they heard an “electric humming” coming from behind the diner at 1306 Croft Avenue just before 6 p.m. When they walked outside they discovered the man.

Chief Eric Andrews with Fire District 26, said the man was “severely burned” and died instantly from severe injuries.

His identity and age was not immediately known.

It was also unclear if the 115,000-volt power line had fallen on the man or if he had touched the fallen line.

Andrews called the incident a “freak accident,” saying it wasn’t windy and no cars hit the power poles. Adding it “just came down.”

Transmission Line for Puget Power owns the line, according to Andrews. The Snohomish County Public Utility District has shut off the power to the line.

Andrews warns residents to stay at least 60 feet away from downed power lines.