MEC&F Expert Engineers

Wednesday, October 26, 2016

Ford Motor Co. is recalling 408,000 cars that are at risk of catching fire due to oil and gas leaks.







Ford recalls 408K vehicles for oil, fuel leaks
Keith Laing, Detroit News Washington Bureau 


10:07 a.m. EDT October 26, 2016


Washington — Ford Motor Co. is recalling 408,000 cars that are at risk of catching fire due to oil and gas leaks.

The Dearborn-based company issued three separate recalls for cars that have problems with their oil and fuel systems. Among the problems reported to the National Highway Traffic Safety Administration are faulty engine oil cooler tube assemblies that Ford said may have insufficient crimps on the hose that could lead to a hose separation and an oil leak.

The company said the problem, which impacts approximately 8,000 2015-17 Ford Shelby GT350/R Mustang vehicles, “may result in engine failure, and — in the presence of an ignition source — could lead to a fire” if there is a sudden loss of oil in the engine.

Ford issued a separate recall for approximately 400,000 2010-12 Ford Escape and 2010-11 Mercury Mariner vehicles equipped with 3.0-liter engines that the company said have fuel delivery module fuel supply port could crack, causing a possible fuel leak.

“A fuel leak in the presence of an ignition source may increase the risk of fire,” Ford said.

Ford also recalled 80 2017 Ford Super Duty 6.7-liter diesel Chassis Cab vehicles, saying the affected vehicles have “inadequate adhesion of the protective shield on the fuel conditioning module may allow it to be dislodged by road debris or water spray.

“If the protective shield is dislodged, road debris or water spray may force open the drain valve on the module,” the company said. “This can lead to air entering the fuel system or a substantial fuel leak. A fuel leak in the presence of an ignition source may increase the risk of fire. In addition, under certain conditions, significant liquid fuel on the road surface may cause a slip hazard, increasing the risk of a crash.”

Ford said it is not aware of any accidents or injuries associated with the issues that led to the recalls that were announced on Wednesday.

The company said its dealers will fix the affected cars for free.

1 in 5 structures on Hilton Head Island in North Carolina suffered some damage by Hurricane Matthew
















Tuesday, Oct. 25, 2016

HILTON HEAD ISLAND, S.C. (AP) - Preliminary figures show that nearly one in five structures on Hilton Head Island suffered some damage when Hurricane Matthew struck the island earlier this month.

The Island Packet of Hilton Head Island reported that about 3,700 structures suffered some damage. Almost 400 of them had substantial damage that amounts to more than half of the assessed value of the building.

Town officials say the numbers are preliminary and a full assessment of every building isn't expected until the end of the week.

There's no immediate breakdown as to how many of the damaged structures are homes and how many are businesses.

Tuesday, October 25, 2016

A construction worker injured after he fell through scaffolding while on a work site in Portland, OR





OCTOBER 25, 2016


PORTLAND, Ore. – Firefighters helped rescue a construction worker that fell through some scaffolding Tuesday afternoon while on a work site near Southwest Barnes Road.

Tualatin Valley Fire & Rescue said the worker was hanging from the scaffolding on the third floor of a building in the 900 block of Southwest Briar Lane.

He had one leg hanging through the scaffolding, officials said. Crews gave him pain medication while he was waiting for emergency crews to lower him down in a Stokes basket.

The man was taken to the hospital for further treatment.

construction worker who died after a fall at the Iroquois Village Apartments construction site on Alice Wagner Way, off Hillside Avenue, in Niskayuna had just unhooked himself




OSHA: Worker unhooked himself in Niskayuna construction fatality
By Daniel Fitzsimmons


 October 25, 2016


Photographer: Marc Schultz
A construction worker died after a fall at the Iroquois Village Apartments construction site on Alice Wagner Way, off Hillside Avenue, in Niskayuna, seen here in March.









NISKAYUNA — A federal labor investigation found that a worker who fell at a Niskayuna construction site in March and later died had unhooked his safety harness from a lifeline just moments before the fall. A witness told investigators the worker unhooked himself in an attempt to untangle his leg from the lifeline.

A lifeline is a nylon or polyester-blend length of rope that’s anchored to stop a fall at height.

Wilfredo Vazquez, 37, died on March 13 after falling 24 feet to the ground, according to an inspection report by the Occupational Safety and Health Organization obtained through a Freedom of Information request.


Where the employee's fall protection was found following the fall.

The accident occurred at the Iroquois Village Apartments development on Alice Wagner Way in Niskayuna. Vasquez and other workers were performing carpentry work on a small ledge just prior to the fall, said the report.

“The only witness to the fall stated that Mr. Vasquez was attached to a rope lifeline, his leg was tangled in the lifeline and he unhooked his lanyard from the dorsal D ring of the harness. While trying to untangle the lifeline, he fell to the ground,” according to the inspection report.

Niskayuna firefighters were called to the scene around 11:30 a.m. on March 13. Vasquez was transported via ambulance to General Electric on River Road in Niskayuna before being airlifted to Albany Medical Center. Vasquez died later that day from injuries he sustained in the fall.

Following the accident, Department of Labor spokesman Ted Fitzgerald said OSHA was investigating three firms attached to the Iroquois Village project: Ballston Mourningkill Associates LLC, the general contractor on the project, Rankin Construction National Builders, LLC, a subcontractor, and Hernandez Framing Inc., a Rankin subcontractor providing framing work.

Hernandez Framing was hit with $15,143 in fines after the OSHA inspection and investigation, but it’s unclear how closely related the violations are to Vasquez’s death.

The company received a $2,673 penalty for a “serious” violation because during the investigation it was found employees were improperly securing their lifelines.

Hernandez faced a second serious violation and $12,471 penalty for failing to provide steps or a ladder where there was a break in elevation of 19 inches or more on the site. The inspection report said employees accessed an exterior walking surface by climbing through a wall opening that measured 2’ 10” from the floor to the bottom of the opening.

OSHA interviews with employees of Hernandez Framing were conducted in Spanish, the inspection report noted. The report also noted under a heading called “Incident causes” that “the employee unhooked his harness dorsal D ring from his [lifeline] prior to falling 24 feet.”

Under a heading called “Incident related issues,” the report says Hernandez Framing had not provided fall protection training to their employees, did not ensure there was a competent party to inspect the job site and the work involved, did not evaluate the fall protection training provided by a previous employer, and did not have a general accident prevention program.


Rope secured around a 2" x 4" and 2" x 6".

Hernandez Framing is based in Dallas, Texas, according to the report. OSHA interviewed owner Raul Hernandez via telephone and asked him to provide health and safety training records, “but no records were received,” said the report.

“[Raul Hernandez] stated that the employees of the crew involved received training for a job in Boston, [Massachusetts] by Patriot Framing,” said the report. “Patriot Framing’s management was contacted by telephone and stated that they had previously supplied fall protection training to the crew of Hernandez Framing and agreed to supply the training records. The records were not received by OSHA.”

Contact information for Raul Hernandez or other company officials could not be found. It’s unclear if Hernandez Framing paid the violation or is appealing OSHA’s findings. Department of Labor spokesman Jim Lally said two weeks ago that the agency is still trying to determine if Hernandez received the citations.

“OSHA is awaiting confirmation that Hernandez Framing received its citations, so this case is still open,” said Lally in an email Oct. 12. “Once received, the employer has 15 business days to comply, meet with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.”

Lally did not immediately return a request for comment by press time Tuesday when the FOIL request was received by this newspaper.


The wooden structure that the anchor was attached to. One nail splintered the wood on the edge of the 2" x 4".

Rankin Construction was cited with an “other than serious” violation and penalized $400 for not including in their fall protection plan a list of workers’ names for those individuals who were authorized to be on the construction site.

Lally said Oct. 12 that Rankin settled with OSHA and wound up paying $300 of the original $400 fine. A spokeswoman for Rankin Construction, based in Ft. Worth, Texas, did not return calls and an email requesting comment.

OSHA did not cite Ballston Mourningkill Associates in connection with the incident.

Lally previously said OSHA drafted a letter to explain their findings to Vasquez’s family, but the letter is not public information. He added Hernandez Framing was cited for two serious violations that were issued under the “fall protection standard.”

“A serious violation exists when the workplace hazard could cause an accident or illness that would most likely result in death or serious physical harm, unless the employer did not know or could not have known of the violation,” he said.

Lally said Hernandez Framing and Ballston Mourningkill Associates had no prior inspections in the last five years. Rankin Construction was inspected in 2012 and cited for two serious violations while working on a senior housing project in Rexford called Coburg Village.

An employee of Secure Energy Services killed in Alberta, CA oilfield near Fox Creek after he was struck by a lose pump hose



OCTOBER 25, 2016

A 47-year-old man was killed in a workplace accident near Fox Creek on Sunday.

The man, an employee of contractor Secure Energy Services, was working at a Shell Canada drilling site about 260 kilometres northwest of Edmonton when the accident occurred. Occupational Health and Safety spokesperson Lauren Welsh said the man was struck by a hose at about 5:45 p.m.

“The work site was situated by the side of a river and the workers were pumping water to a different location for well-site activities,” Welsh said. “The pumps started revving, and when workers went to investigate, one of the hoses let go and struck a worker.”

The man, who has not been identified, was treated by paramedics at the scene and then transferred to hospital in Fox Creek, where he died.

The worksite was immediately shut down and OHS officers are investigating. Counselling support is being provided to employees through both Secure Energy and Shell Canada’s Employee Assistance programs.

In a statement, Secure Energy Services President and CEO Rene Amirault said he was shocked by the tragedy.

“Our thoughts are with the family, friends and co-workers of the deceased as we work through this difficult time,” Amirault said, adding it was the first fatal worksite accident involving a Secure Energy Services employee in the company’s history.

Secure Energy Services, a publicly traded energy services company with 1,000 employees in Canada and the U.S., has its corporate head office in Calgary. The company offers fluids and solids solutions to the oil and gas industry.

Shell Canada said in a statement it is conducting its own investigation into the cause of the accident, in addition to cooperating with the OHS investigation and RCMP.

“We are deeply saddened by the tragic loss of an industry colleague, and our thoughts are with the family,” said Murray Elliott, Shell general manager, Greater Deep Basin.

“The safety of our staff, contractors and neighbours is our top priority in everything we do. We are working closely with the parties involved to gather more information and learn from this incident.”

This is the 16th death as a result of a workplace incident in Alberta in 2016, according to OHS.


=====



Our Fox Creek Full Service Terminal offers waste management, fluid disposal, custom treating and terminalling services. We have applied best-in-class engineering practices throughout the design of the facility to meet the expressed needs and preferences of our customers.

As responsible corporate neighbours we designed, built and operate this facility with the environment and public health and safety as a top priority:
  • When offloading sour hydrocarbon-based liquid and slurry loads, a closed system is used to prevent fugitive H2S emissions and occupational exposure.
  • Our process vessels and tanks use a state-of-the-art vapor collection and recovery system to prevent fugitive emissions. When new product enters the tank, the blanket gas is displaced and sent through the vapour recovery system.
  • The site has an intermittent, air-assisted natural gas piloted flare at the site. Flaring activities at the site meet the requirements of ERCB Directive 60.