MEC&F Expert Engineers

Friday, May 1, 2015

Coast Guard member pleads guilty, sentenced for violating UCMJ articles


Lady Justice 300PORTSMOUTH, Va. — A Coast Guard member charged with violating a number of Articles of the Uniform Code of Military Justice pled guilty and was sentenced Thursday during a special court-martial in Norfolk, Va.
Senior Chief Petty Officer James R. Hamilton, 33, pled guilty in accordance with the pre-trial agreement to two specifications of violation of Article 92,Uniform Code of Military Justice —violation of a Lawful General Order as well as six specifications of violation of Article 128, UCMJ—Assault. Hamilton was sentenced to a bad conduct discharge, 80 days confinement and reduced to E-1. As a result of the plea agreement, his reduction to E-1 will be capped at E-5.
Vice Adm. William Lee, commander of the Coast Guard Atlantic Area, referred Hamilton’s case to general court-martial on July 24, 2014, following an Article 32 hearing completed on June 1, 2014, which is similar to a grand jury hearing. The case was later referred to a special court-martial as part of a plea agreement.
Hamilton was formerly assigned to the Coast Guard Cutter Northland homeported in Portsmouth.

OSHA again cites Tip Top Roofing for failing to provide workers fall protection. The company has been cited multiple times since 2008 for fall safety violations.

April 30, 2015

Employer name and location: Tip Top Roofing & Construction
2030 Coltonville Road, Sycamore, Illinois


Investigation site: 161 John Street, DeKalb, Illinois

National Safety Stand Down
Date investigation initiated and what prompted inspection: On Nov. 4, 2014, the U.S. Department of Labor’s Occupational Safety and Health Administration’s Aurora Area Office initiated an inspection of roofing contractor Tip Top Roofing & Construction Inc. after receiving a complaint alleging workers were exposed to fall hazards at a residential jobsite in DeKalb.

Investigation findings: OSHA issued two willful and four serious violations for exposing workers to falls and other hazards while re-roofing an existing residence
Two willful violations cite the company for:
  • Exposing workers to fall hazards of about  22 feet because the company failed to provide fall protection  
  • Failing to extend a ladder at least three feet above the landing to provide safe roof access
Four serious violations involve allowing employees to perform roofing work in close proximity to energized power lines, lack of personal protective equipment and allowing employees to carry loads of plywood and other roofing materials while climbing ladders. The company has been cited multiple times since 2008 for fall safety violations. The most recent citations were issued in 2013. 

Quote: “A roofer can fall to his death in mere seconds. By refusing to provide fall protection to its workers, Tip Top Roofing and Construction is gambling with workers’ lives and livelihood —and that is unacceptable,” said Jacob Scott, OSHA’s Area Director in Aurora. “With everything we know about how to work safely, it’s troubling to see how many workers are still injured every year in the construction trades, and particularly from falls.”

Each year 38,000 construction injuries are reported. Fatal falls, slips, or trips took the lives of 699 workers in 2013. Falls to a lower level accounted for 574 of those fatalities. About half of the 1.6 million Americans employed in the construction industry, work in residential construction. 


To view citations see: http://www.osha.gov/ooc/citations/TipTopRoofing_1006396_0429_15.pdf* 

Proposed Penalties: $124,780.
To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA’s toll-free hotline at 800-321-OSHA (6742) or the agency’s Aurora Area Office at 630-896-8700.

Workers exposed to amputation hazards at Vista Window Company

April 30, 2015

Employer name: Vista Window Company LLC. 

Investigation site: 1701 Henn Parkway, Warren, Ohio

Date investigation initiated and what prompted inspection: On Oct. 22, 2014, the U.S. Department of Labor's Occupational Safety and Health Administration's Cleveland office initiated an inspection at Vista Window Company LLC after receiving a complaint alleging unsafe working conditions. This was the first OSHA inspection at the Warren-based company which manufactures vinyl windows.

Investigation findings: Investigators found Vista Window Company failed to protect workers from operating parts of machinery by the use of guards. The company also failed to develop procedures for applying locking devices to prevent unintentional operation of machinery during service and maintenance. Both of these violations exposed workers to amputation* hazards. 

In total, OSHA issued 16 serious and three other-than-serious violations. Other violations include:
  • Failing to provide hearing and eye protection for worker's wearing prescription lenses.
  • Lack of audiograms for employers exposed to noise
  • Lack of training on work place hazards and procedures
  • Electrical safety violations
"OSHA inspectors found numerous machines operating without required safe guards and procedures to protect workers from coming in contact with moving parts," said Howard Eberts, OSHA's area director in Cleveland. "Each year thousands of workers suffer lacerations, bruises, amputations and other serious injuries because these procedures are not in place and workers are not trained to recognize dangers. Vista Window Company needs to make immediate changes to its safety and health programs." 

Proposed Penalties: $79,200

To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Cleveland Area Office at (216) 447-4194.

Another Model Employer: Workers exposed to amputation hazards at Clearwater Paper Neenah OSHA cites 9 serious violations, proposes fines of $49K

April 30, 2015

Employer name: Cellu Tissue Neenah operating as Clearwater Paper Neenah

Investigation site: 249 North Lake Street, Neenah, Wisconsin

Date investigation initiated and what prompted inspection: On Dec. 9, 2014, the U.S. Department of Labor's Occupational Safety and Health Administration's Appleton office initiated an inspection at Clearwater Paper Neenah under the National Emphasis Program for Amputations. The site was selected because equipment used at the paper mill can put employees at risk for such injuries. Amputation hazards are among the most frequently cited by OSHA.

Investigation findings: Investigators found Clearwater Paper Neenah failed to protect workers from operating parts of machinery by the using safety guards. 

The company also failed to develop procedures for the control of locking devices to prevent unintentional operation of machinery during service and maintenance. Both of these violations exposed workers to amputation* hazards.
In total, OSHA issued nine serious safety violations. Other violations include:
  • Lack of eye wash stations for worker's exposed to corrosive chemicals
  • Lack of safety latches on crane hooks.
  • Lack of guard rails which exposed workers to fall hazards over dangerous equipment
"OSHA inspectors found numerous machines operating without required safeguards and procedures to protect workers," said Robert Bonack, OSHA's area director in Appleton "Each year thousands of workers suffer lacerations, bruises, amputations and other serious injuries because these procedures are not in place and workers are not trained to recognize dangers. Clearwater Paper Neenah and its union representatives took immediate steps to address these hazards."

Proposed Penalties: $49,075
To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Appleton Area Office at (920) 734-4521.

Model Employer: Lack of proper safety controls leads to loss of worker's 3 fingers in metal press at stamping company, inspectors find OSHA cites Wellington Stamping for 7 serious violations, proposes penalties of $49K

April 30, 2015

WELLINGTON, Ohio – The life of a 23-year-old man working at a metal stamping company was changed forever when three fingers on his right hand were crushed in a power press in January 2015.

U.S. Department of Labor Occupational Safety and Health Administration inspectors say the incident at Wellington Stamping could have been prevented. 

They determined the company did not train the worker on safely operating the mechanical press, which also lacked adequate safety mechanisms. Their investigation of the incident, in which the man suffered the loss of his right pointer, middle and ring fingers while clearing a machine jam, produced seven violations for Wellington Stamping, with proposed penalties of $49,000.

"Our investigation found this young man's serious injuries could have been prevented if his employer had complied with OSHA safety standards. The company must correct these discrepancies," said Kimberly Nelson, OSHA's area director in Toledo.

OSHA investigators also found that Wellington Stamping failed to train workers in energy control procedures, such as powering off and affixing locking devices. Doing so prevents the machine from turning on unexpectedly and causing a dangerous amputation hazard*. 

In total, seven serious citations were issued. An OSHA violation is serious if death or serious physical harm could result from a hazard an employer knew or should have known exists.

The incident was reported to OSHA by Shiloh Industries Inc., operator of Wellington Stamping, under new self-reporting requirements that went into effect Jan. 1. Those requirements mandate that employers must report amputation injuries within 24 hours.

Each year, more than 200,000 American workers suffer cuts, lacerations and amputations from operating parts of dangerous machinery. Inspectors often find that various mechanical power press brakes and other machines used in manufacturing plants lack adequate safety mechanisms. Machine hazards continue to be among the most frequently cited OSHA standards. 

Shiloh Industries has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director, or contest the findings before the independent Occupational Safety and Health Review Commission. 

To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the agency's Toledo Area Office at 419-259-7542.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.