MEC&F Expert Engineers

Wednesday, November 12, 2014

NEW OSHA GUIDANCE – ROADMAP TO COMPLYING WITH ITS CRANES AND DERRICKS IN CONSTRUCTION STANDARD



New OSHA Guidance – Roadmap to Complying with its Cranes and Derricks in Construction Standard
10/30/2014




Although OSHA implemented its Cranes and Derricks in Construction Standard (29 C.F.R. 1926 Subpart CC) back in 2010, it just now released its directive for how OSHA inspectors should enforce that rule.  Multiple layers of legal review and approval, as well as revisions and challenges to the standard, contributed to the delay.
Released on October 23, 2014, this directive includes an abbreviated inspection checklist and inspection guidance for OSHA inspectors to follow, as well as recommended citation policies for complex requirements.
Reviewing the procedures OSHA expects its inspectors to follow can be helpful to assist contractors and operators in ensuring they are compliant with the new standard, and avoid a citation if an inspection is conducted. The abbreviated check list, found at section VIII.B of the directive, provides a road map for what inspectors will be looking at during a site visit. Contractors should read through this list and make sure all persons who work with cranes on site comply.



The directive also includes inspection guidance and citation policies, which identifies who should be interviewed at a site and what types of documents should be turned over during the inspection. It is important to note that the inspectors may likely be interviewing the following persons based on this directive: (1) controlling employer; (2) employer of the operator and lift crew; (3) operator; (4) equipment inspector; (5) maintenance personnel; (6) lift and A/D directors; (7) crew members; (8) riggers and (9) signal persons. Given this broad spectrum of persons who may be interviewed, in particular the non-managerial personnel, it is important to ensure proper training and crane safety compliance prior to an inspection, and certainly in the event of an accident.
The directive applies to the Federal OSHA plan only, however, State Plan States must implement enforcement policies and procedures for their Cranes and Derricks standards which are at least as effective as those in the directive. If your projects are located in jurisdictions which operate their own State OSHA plans, please check your State plan’s website, or the Federal OSHA webpage to determine if there are additional requirements beyond those included in the new directive. At a minimum, however, all construction projects will be governed by the guidelines set forth in this directive. A state plan may increase the requirements, but may not require less than what is set forth here.



Loss Lessons involving Cranes
In the last few months we have encountered claims involving tipping and damaging buildings.  Cranes are the most useful equipment at construction sites.  However, if misused they can cause some serious harm.  Both crane accidents we investigated were the result of inadequate planning, which led to instability and overturning of the crane.



The first claim involved a 12-ton crane attempting to lift a 20-foot steel beam weighting approximately 500 pounds.  The carne was stationed near the base of a new building and, despite being available, neither wood pads for the outriggers nor counter weights were utilized.  During the lift, the right front outrigger sunk into the ground approximately six to eight inches causing the crane to tip onto the building damaging a steel roof beam, masonry, metal framing, concrete fascia, and the crane itself.  The crane company had to employ two additional cranes to re-erect the tipped crane.  Some minor worker injuries were also caused by the tipping of the crane.



The second claim involved a 40-ton crane that was lifting three bundles of roof “I-Joists” weighing approximately 2,080 pounds.  One of the front outriggers collapsed causing the crane to tilt resulting in damage to a masonry wall, the parapet of adjoining masonry walls, metal support beams and scaffolding.  When the boom crashed onto the wall, the joists fell onto the floor inside the building, damaging 30 of these joists.  In addition, the hook of the crane struck the floor and caused damage to the concrete floor.  Finally, hydraulic fluid leaked from the crane, which required cleanup and soil remediation.



Both of these accidents could have been avoided by simple pre-planning.  In the first case, the operator and site supervisor should have identified that the crane should not have been situated near the base of a new building, because this area is the softest, even when properly compacted.  Additionally, the wooden pads need to be utilized at all times regardless of how many lifts will be conducted.  The wooden pads or cribbing are necessary to distribute the weight of the crane and its load.
Pre-planning should also include the verification that the crane being used is free of hazards and defects.  This is not only common sense but is also a federal requirement.  The rule 29 CFR Part 1926, Subpart CC requires that the employer shall designate a competent person who shall inspect all machinery and equipment prior to each use, and during use, to make sure it is in safe operating condition.  Any deficiencies shall be repaired, or defective parts replaced, before continued use.
It is necessary to abide by the OSHA Subpart CC, – Cranes and Dericks in Construction.  Additionally, all manufacturer’s specifications and limitations need to be followed.  Accidents can be avoided by careful job planning.  The person in charge must have a clear understanding of the work to be performed and consider all potential dangers at the job site.


Driving truck with raised boom results in overturn
November 5, 2014
A man trimming trees for a utility company in Maynardville, Tennessee overturned the utility truck/platform he was using yesterday, after he decided to drive it with the boom raised.

The raised boom became caught up in the overhead wires, which was enough to pull the machine over. He was slightly hurt, but thankfully there was no one in the platform. It begs the question, why was he moving the lift while elevated?

The man, who works for ABC Professional Tree Services, was carrying out contract work for the Knoxville Utilities Board trimming trees back from around power lines. Power was apparently cut to a number of homes in the area – we assume that the power lines had been deactivated.

                                The overturned utility truck


Houston, Texas
A five axle 170 ton All Terrain crane overturned on Friday in west Houston, Texas dropping its boom into the back end of a car dealership yard.
The crane, a Grove GMK5225 operated by Circle 8 Crane Services of Houston, was working or setting up at a tower block construction site in Kirkwood when it went over. No counterweights appear to have been fitted and the outriggers on the side of the fall were either retracted or they have punched through into the ground. The outriggers to the rear are fully extended – the boom appears to have been fully extended at the time.
Thankfully no one was hurt and the even the operator walked away totally unharmed. Property damage – the crane excluded – was also light.



                 Photo from the scene indicates an outrigger issue

Another failed ground incident
November 8, 2014
A 3.5 tonne truck mounted lift overturned in Hengelo, Netherlands yesterday after one of its outrigger jacks broke through the bricks on the sidewalk/pavement.

               The machine's outrigger punched through the paved surface

The 20 metre articulated unit was being used by a window washing company and from what we can see no mats had been used under the jack pads. The lift came to rest against the building and thankfully no one was injured. The damage was also relatively light.

                           It does not look like any mats were used



                  The boom came to rest against the side of the building

The ground in the Netherlands is generally almost pure sand with the majority of block paved paths having no hard core to speak off.  It is negligent to contemplate forgoing the use of mats! Absolutely shocking.

Crane Flips on Highway, San Clemente, California
An All Terrain crane with trailing boom flipped over while travelling on Interstate 5 in San Clemente, California – between Los Angeles and San Diego – on Thursday. Thankfully no one was hurt in the incident.
The four axle Liebherr crane with three axle boom trailer, owned by one of the state’s oldest crane rental companies Bob Hill, swerved into the concrete centre divider several times as the operator tried to keep control of it. Finally it flipped onto its side.



                           An aerial view of the incident
This is not the first time that an All Terrain with trailing boom has flipped or caused havoc on Southern California’s highways. A number of crane operators consider trailing booms – which are dictated by road formulas – are considerably more dangerous than higher axle loads of a longer chassis. At least this time round there are no injuries.




                   The unit has a three axle boom trailer

Metropolitan Engineering, Consulting & Forensics (MECF)
Providing Competent, Expert and Objective Investigative Engineering and Consulting Services
P.O. Box 520
Tenafly, NJ 07670-0520
Tel.: (973) 897-8162
Fax: (973) 810-0440
We are happy to announce the launch of our twitter account.  Please make sure to follow us at @MetropForensics
To unsubscribe from future technical blogs and announcements, please reply to this email with the word “unsubscribe” in the subject line.

Metropolitan appreciates your business.
Feel free to recommend our services to your friends and colleagues.
We know you need to process damage claims quickly and knowing the facts is now faster than ever – within 24 hours of site visit.  Our Pegasos Forensic Investigation Services (PFIS) feature:
·         Expert Forensic Investigators on-site.
·         Defensible, Readable, Conclusive Reports.
·         Fixed-Prices starting at $499 per chimney or roof inspection (volume discounts are also available).  Flood loss assessments start at $999.0.  HVAC equipment only inspections start at $299 for local (within one hour one-way drive) assignments.
·         10-State Coverage Area.
All of our employees and associates are subjected to full FBI background investigations and security clearance.



Tuesday, November 11, 2014

FAILURE TO FOLLOW FREEZING WEATHER PROCEDURES, CAUSED A BIG LOSS OF NATURAL GAS AND A HUGE FINE FOR CABOT OIL & GAS CORPORATION



FAILURE TO FOLLOW FREEZING WEATHER PROCEDURES, CAUSED A BIG LOSS OF NATURAL GAS AND A HUGE FINE FOR CABOT OIL & GAS CORPORATION

The Department of Environmental Protection (DEP) today announced it has fined Cabot Oil & Gas Corp. of Pittsburgh $76,546 for a January well control incident at the company’s Huston well pad in Brooklyn Township, Susquehanna County.



“Cabot lost control of the Huston J1 gas well for 27 hours, to which the department responded to promptly to ensure there were no significant environmental impacts,” DEP Director of District Oil and Gas Operations John Ryder said. “In this incident, mostly gas was released, which dissipated quickly to background levels within 100 feet from the well.”

To read more, please use this link:




The incident began the morning of Jan. 5 when a Cabot subcontractor was replacing equipment on the wellhead.  The subcontractor did not follow standard operating procedures for the process by failing to first warm the wellhead prior to conducting any work in the freezing temperature. This resulted in damage to a wing valve.
A subsequent analysis of the damaged wing valve indicated that it was in the open position, allowing gas to escape. The analysis also indicated that frozen sand in the valve bore may have obstructed movement of the gate, causing a function test to indicate the valve was closed when it was open.
Cabot contacted Wild Well Control of Houston, Texas, for assistance, which installed two hydraulic valves to diminish the gas flow in the damaged valve to allow full replacement. The well was brought under control shortly before 1 p.m. on Jan. 6.
During the incident, Cabot contacted five property owners within a quarter mile of the well pad to notify them of the situation. However, it was determined that no evacuation was needed based on the results of DEP air monitoring. DEP staff used meters to detect combustible gas on and in the vicinity of the well pad, and to determine if there was an explosive atmosphere.
DEP Oil and Gas and Emergency Response program staff were on scene providing oversight throughout the incident.
The department issued a notice of violation (NOV) to Cabot on Jan. 16 for violations of the Solid Waste Management Act, Clean Streams Law and the Chapter 78 oil and gas regulations. The NOV requested a written response within 10 days, which Cabot provided.
In its response, the company said it could not determine the exact amount of natural gas or fluid released because it was not possible to safely measure the flows, but said the majority of the release consisted of natural gas.



Pennsylvania hits another production record
Gas production in Pennsylvania continued to hit records, with 1.9 trillion cubic feet of gas coming out of the ground during the first half of the year, according to new data released from the Pennsylvania Department of Environmental Protection on Monday. That's a 14 percent increase over the previous six-month period when operators pulled 1.7 trillion cubic feet of gas out of the ground. A year ago it was closer to 1.4 trillion.
About 510 new wells came online during the reporting period. 
Infrastructure constraints in Appalachia have made it difficult for producers to get their gas out of this underpriced market to hungry demand centers outside of Pennsylvania, but some of that may be easing.
“There's a lot of new capacity over the first half of the year," said Sam Gorgen, a U.S. crude oil production analyst at the Energy Information Administration, who monitors Pennsylvania oil and gas production.
"Certainly, there is the possibility of companies wanting to bring on more wells, and there could be some restrictions on [how much] they could flow from those wells," he said. 
Susquehanna County had the most gas production during the past six months, with 455 billion cubic feet, or 23 percent of the state sum. Bradford and Lycoming counties followed.
In southwestern Pennsylvania, Washington County continued to lead the area in gas production with 198 billion cubic feet, followed closely by Greene County with 172 billion cubic feet. Production from the Greater Pittsburgh region accounted for about a quarter of all statewide gas reported during the first six months of 2014.
Washington County was once again the leader in liquids production in the state by a large margin, with 1.8 million barrels of condensate, most of that coming from Range Resources, and 204,316 barrels of oil, all from Chesapeake Energy.


While a distant second, Mercer County is starting to emerge as another liquids-rich destination, with Shell and Halcon having some successes there with condensate and oil. Last week, Shell sold off its acreage in Mercer and neighboring Western Pennsylvania counties to Rex Energy Corp.
Five Cabot Oil & Gas wells in Susquehanna County were the most productive during the past six months, pumping out the most gas per day even though some had already been producing for more than six months. Typically, a shale gas well starts slowing production after only a few months.
The top five producers in the state — Chesapeake Energy, Cabot Oil & Gas, Range Resources, Southwestern Energy, and EQT Corp, in that order —  accounted for nearly half of the state's gas supply for the first half of the year.



Metropolitan Engineering, Consulting & Forensics (MECF)
Providing Competent, Expert and Objective Investigative Engineering and Consulting Services
P.O. Box 520
Tenafly, NJ 07670-0520
Tel.: (973) 897-8162
Fax: (973) 810-0440
We are happy to announce the launch of our twitter account.  Please make sure to follow us at @MetropForensics
To unsubscribe from future technical blogs and announcements, please reply to this email with the word “unsubscribe” in the subject line.

Metropolitan appreciates your business.
Feel free to recommend our services to your friends and colleagues.
We know you need to process damage claims quickly and knowing the facts is now faster than ever – within 24 hours of site visit.  Our Pegasos Forensic Investigation Services (PFIS) feature:
·         Expert Forensic Investigators on-site.
·         Defensible, Readable, Conclusive Reports.
·         Fixed-Prices starting at $499 per chimney or roof inspection (volume discounts are also available).  Flood loss assessments start at $999.0.  HVAC equipment only inspections start at $299 for local (within one hour one-way drive) assignments.
·         10-State Coverage Area.
All of our employees and associates are subjected to full FBI background investigations and security clearance.