MEC&F Expert Engineers : MEASUREMENT OF NATURAL GAS COMPRESSOR STATION-RELATED NOISE

Wednesday, November 26, 2014

MEASUREMENT OF NATURAL GAS COMPRESSOR STATION-RELATED NOISE

MEASUREMENT OF NATURAL GAS COMPRESSOR STATION-RELATED NOISE

References

  1. Hawks, N.F. Transportation Research Circular. Washington, DC: Transportation Research Board, February 1985.
  2. Barry, T.M. and J.A. Regan. FHWA Highway Traffic Noise Prediction Model. Report No. FHWA-RD-77-108. Washington, DC: Federal Highway Administration, December 1978.
  3. Anderson, G.S., Lee, C.S., Fleming, G.G., and Menge, C.W. "FHWA Traffic Noise Model (FHWA TNM®), Version 1.0: User's Guide." Report No. FHWA-PD-96-009. Cambridge, MA: John A. Volpe National Transportation Systems Center, (to be published).
  4. Fleming, G.G., Rapoza, A.S., and Lee C.S.Development of the Reference Energy Mean Emission Level Data Base for the FHWA Traffic Noise Model (FHWA TNM®), Version 1.0. Report No. FHWA-PD-96-008. Cambridge, MA: John A. Volpe National Transportation Systems Center, November 1995.
  5. "Acoustical Terminology." American National Standard, ANSi S1.1-1994. New York: American National Standards Institute, 1994.
  6. "Methods for Determination of Insertion Loss of Outdoor Noise Barriers." American National Standard, ANSI S12.8-1987. New York: American National Standards Institute, 1987 (Updated version to be published).
  7. "Procedures for Outdoor Measurement of Sound Pressure Level." American National Standard, ANSI Standard S12.18-1994. New York: American National Standards Institute, 1994.
  8. Johnson, D.L., Marsh, A.H., and Harris, C.M. "Acoustical Measurement Instruments."Handbook of Acoustical Measurements and Noise Control. New York: Columbia University, 1991.
  9. "Specification for Sound Level Meters." American National Standard, ANSI Standard S1.4-1983 (R 1990). New York: American National Standards Institute, 1990.
  10. Peterson, A., Gross, E. Handbook of Noise Measurement. Concord, MA: General Radio Company, 1963.
  11. Rickley, E.J., Ingard, U., Cho, Y.C., and Quinn, R.W. Roadside Barrier Effectiveness: Noise Measurement Program. Report No. NHTSA-78-24. John A. Volpe National Transportation Systems Center, 1978.
  12. Condensor Microphones and Microphone Preamplifiers.Denmark: Brüel & Kjær Instruments, Inc., May 1977.
  13. Broch, J.T. Acoustic Noise Measurements. Denmark: Brüel & Kjær Instruments, Inc., June 1975.
  14. "Electroacoustics, Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave-band Sound pressure levels in noise certification of transport-category aeroplanes." International Electrotechnical Commission Standard, IEC Draft Standard 1265. Denmark: International Electrotechnical Commission, 1993.
  15. "Method for Calibration of Microphones." American National Standard, ANSI Standard S1.10-1966 (R 1986). New York: American National Standards Institute, 1986.
  16. "Methods for Measurement of Sound Pressure Levels." American National Standard, ANSI Standard S1.13-1995. New York: American National Standards Institute, 1995.
  17. McGillem, C.D., Cooper, G.R. Continuous and Discrete Signal and System Analysis. New York: Purdue University, School of Electrical Engineering, 1984.
  18. Stremler, F.G. Introduction to Communication Systems. Madison, WI: University of Wisconsin, December 1982.
  19. "Specification for Octave-Band and Fractional-Octave-Band analog and Digital Filters."American National Standard, ANSI Standard S1.11-1986 (R 1993).New York: American National Standards Institute, 1993.
  20. Yerges, L.F. Sound, Noise and Vibration Control. New York: Van Nostrand Reinhold Company, 1978.
  21. "Sound Calibrators." International Electrotechnical Commission Standard, IEC Standard 942. Denmark: International Electrotechnical Commission, 1988.
  22. Hendricks, R.W. Field Evaluation of Acoustical Performance of Parallel Highway Noise Barriers Along Route 99 in Sacramento, California. Report No. FHWA/CA/TL-91/01. Sacramento, CA: California Department of Transportation, Division of New Technology, Materials and Research, January 1991.
  23. Wayson, R.L.Atmospheric Effects on Traffic Noise Propagation. Nashville, TN: Vanderbilt University, August 1989.
  24. Hendricks, R.W.California Vehicle Noise Emission Levels. Report No. FHWA/CA/TL-87/03. Sacramento, CA: California Department of Transportation, Division of New Technology, Materials and Research, January 1987.
  25. Fleming, G.G. and E.J. Rickley.Performance Evaluation of Experimental Highway Noise Barriers. Report No. FHWA-RD-94-093. Cambridge, MA: John A. Volpe National Transportation Systems Center, April 1994.
  26. "Method for Measuring the Influence of Road Surfaces on Traffic Noise: The Statistical Pass-By Method." International Organization for Standardization, ISO/CD 11819-1. Delft, Netherlands: International Organization for Standardization, November, 1994.
  27. "Standard Values of Atmospheric Absorption as a Function of Temperature and Humidity."Society of Automotive Engineers Standard, SAe 866A. New York: Society of Automotive Engineers, March 1975.
  28. "Method for Calculation of the Absorption of Sound By the Atmosphere." American National Standard, ANSI Standard S1.26-1995. New York: American National Standards Institute, 1995.
  29. "Acoustics-Attenuation of Sound During Propagation Outdoors-Part 1: Calculation of the Absorption of Sound by the Atmosphere." International Organization for Standardization, ISO 9613-1. Geneva, Switzerland: International Organization for Standardization, 1993.
  30. Operator's Manual for Stationary Radar, Model K-15 II Hand Held Unit.Owensboro, KY: MPH Industries, Inc., 1985.
  31. Fleming, G.G. and E.J. Rickley.Parallel Barrier Effectiveness: Dulles Noise Barrier Project. Report No. FHWA-RD-90-105. Cambridge, MA: John A. Volpe National Transportation Systems Center, May 1990.
  32. "Field Measurement of Airborne Sound Insulation of Building Facades and Facade Elements." American Society of Testing and Materials, ASTM Standard E 966-84. Philadelphia, PA: American Society of Testing and Materials, 1984.
  33. "Specification for Personal Noise Dosimeters." American National Standard, ANSI Standard S1.25-1991. New York: American National Standards Institute, 1991.
  34. "Instrumentation Reference Issue."Sound & Vibration. Bay Village, OH: Acoustical Publications, Inc., March 1996.
  35. "Fundamentals and Abatement of Highway Traffic Noise: Textbook and Course." Washington, DC: Federal Highway Administration, September 1980.
  36. Fleming, G.G., Rickley, E.J. Development of National Reference Energy Mean Emission Levels for Constant-Flow Roadway Traffic: Test Plan. Letter Report No. DTS-75-HW327-LR2. Cambridge, MA: John A. Volpe National Transportation Systems Center, September 1993.
  37. Private telecommunication with Gilles Daigle. National Research Council. Ottawa, Canada, February 27, 1996.
  38. Hendriks, R.W. and J. Hecker. Parallel Noise Barrier Report: A Noise Absorptive Demonstration Project. Sacramento, CA: California Department of Transportation, July 1989.
  39. Menge, C.W., Rossano, C.F., Anderson, G.S., Bajdek, C.J."FHWA Traffic Noise Model (FHWA TNM®), Version 1.0: Technical Manual." Report No. FHWA-PD-96-010. Cambridge, MA: John A. Volpe National Transportation Systems Center, (to be published).
  40. "Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method."American Society of Testing and Materials, ASTM Standard C 423-90a. Philadelphia, PA: American Society of Testing and Materials, 1990.
  41. "Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method." American Society of Testing and Materials, ASTM Standard C 384-95a.Philadelphia, PA: American Society of Testing and Materials, 1995.
  42. "Classification for Rating Sound Insulation." American Society of Testing and Materials, ASTM Standard E 413-87 (R1994).Philadelphia, PA: American Society of Testing and Materials, 1987.
  43. Reagan, J.A. and C.A. Grant. Highway Construction Noise: Measurement, Prediction and Mitigation. Report No. FHWA-HEV-2-77. Washington, DC: Federal Highway Administration, March 1977.
  44. "Exterior Sound Level Measurement Procedure for Powered Mobile Construction Equipment." Society of Automotive Engineers' Standard, SAe J88a. Society of Automotive Engineers, 1976.
  45. "Sound Levels for Engine Powered Equipment." Society of Automotive Engineers' Standard, SAE J952b. Society of Automotive Engineers, 1976.
  46. Report of 1977 Symposium on Highway Construction Noise. Report No. FHWA-TS-77-211. Cranford, NJ: Dames & Moore, 1977.
  47. "Measurement of Occupational Noise Exposure."American National Standard, ANSI Standard S12.19-1996. New York: American National Standards Institute, (to be published).
  48. "Occupational Noise Exposure Standard."Federal Register. U.S. Department of Labor, Occupational Safety and Health Administration, Code of Federal Regulations, Title 29, Chapter XVII, Part 1910. March 1983.
  49. "Quantities and Procedures for Description and Measurement of Environmental Sound. Part 1." American National Standard, ANSI Standard S12.9-1988/Part 1 (R 1993). New York: American National Standards Institute, 1993.
  50. "Ground Impedance - Measurement of Ground Impedance."American National Standard. New York: American National Standards Institute, (to be published).


Metropolitan Engineering, Consulting & Forensics (MECF)
Providing Competent, Expert and Objective Investigative Engineering and Consulting Services
P.O. Box 520
Tenafly, NJ 07670-0520
Tel.: (973) 897-8162
Fax: (973) 810-0440
E-mail: metroforensics@gmail.com
Web pages: https://sites.google.com/site/metropolitanforensics/
https://sites.google.com/site/metropolitanenvironmental/
https://sites.google.com/site/metroforensics3/
We are happy to announce the launch of our twitter account. Please make sure to follow us at @MetropForensics or @metroforensics

Metropolitan appreciates your business.
Feel free to recommend our services to your friends and colleagues.

To unsubscribe from future technical blogs and announcements, please reply to this email with the word “unsubscribe” in the subject line.
 
Posted by at