Tuesday, August 16, 2016

HOW TO PREVENT VEHICLE BACKOVER INJURIES AND DEATHS











MARCH 30, 2015


Backing vehicles and equipment are a serious occupational hazard. The Bureau of Labor Statistics states that, of the 443 struck-by fatalities at road construction sites between 2003 and 2010, 143 cases involved a vehicle or mobile equipment backing up.


To help prevent backover injuries and deaths, NIOSH recommends a number of standard operating procedures:


  • Create and enforce an operating procedure that addresses how to work safely and lists best practices to follow when working near vehicles and other equipment.
  • Establish safety procedures for working at night with backing equipment. Ensure high-visibility apparel is worn.
  • Take precautions. Use equipment that creates minimal blind spots or has proximity warning devices.
  • Before work begins, design the worksites to minimize or eliminate the need for backing vehicles and equipment.
  • Hire a competent person to supervise worksites involving backing vehicles and equipment.
  • Be sure drivers know not to back up equipment unless they are under the direction of a spotter.
  • Use barrels, barricades, cones or reflective devices to guide vehicles and equipment away from workers.
  • Post signs informing workers where it is safe to walk.


NIOSH states that before work begins, vehicle and equipment operators need to inspect their machinery for any issues. Ensure everything, including mirrors and windows, is clear and in good working order. If something is found to be defective, remove the vehicle or equipment from service until repairs are made.
When operating equipment, know its blind spots. If you lose contact with your spotter for any reason, immediately stop work.


NIOSH also notes that clear communication is key. “At the start of each shift, review communications signals (verbal, hand signals, flags) between spotters, machine operators, truck drivers, and workers on foot,” the agency states.
For workers on foot near backing vehicles or equipment, NIOSH recommends employees adhere to the following:


· Wear appropriate high-visibility personal protective equipment.
· Know the blind spots of vehicles and equipment you work near.
· Never approach a piece of equipment or vehicle without a clear signal of acknowledgment from the operator.
· Avoid areas where vehicles and equipment travel.
· Stay alert for the sound of reversing alarms.
· Avoid complacency. Always know your surroundings.




//----------------------------------//



VEHICLE & EQUIPMENT OPERATION : BACKING EQUIPMENT AND SNOWPLOWS 



Vehicle backing accidents can happen at any time of the year, but when winter comes and there is snow to be cleared, this type of incident becomes even more likely. 


It seems like every year a backing accident involving a motorist and county equipment occurs in Michigan, despite all the efforts of the County Road Commissions to avoid these problems. 

However, you may also be interested to know that there are a number of backing accidents that occur in Road Commission garages and even in Road Commission yards. Often times, employees are injured or property is damaged. 


Backing accidents are due to a great many factors, including poor visibility, blind spots, difficult terrain, and driver fatigue or inattentiveness. But, let’s face it, the motoring public generally doesn’t focus much attention on avoiding snowplows or other vehicles/equipment with which they share the road. So it is your responsibility as a Road Commission employee to take extra care while out on the road. 



That makes avoiding an accident your responsibility, a responsibility that all county employees have to protect the public, but also a responsibility mandated by law. 


There may be serious legal repercussions if you get into a vehicle backing accident, so even though you as an operator may be doing everything else correctly, you should still remember that you are the one driving the 160,000-pound truck. Let’s not dwell on the negative, however. The point of our discussion today is to make sure that everyone on the road gets home safely.


Here are some strategies that veteran drivers use to avoid vehicle backing accidents. 


First of all, try to make a mental note of all the vehicles around you as you drive. If you see a motorist stop or turn off, then you can cross them off your list; but if not, then that vehicle is likely hiding somewhere in your blind spots or dead zone. 

Use curves in the road to help you. When entering an intersection, come to a stop at an angle if it’s safe to do so. If it’s dark out, use reflected light from snow banks or trees as additional queues that a vehicle is behind you. Activate your lights and beacons so that you are more visible. Ensure that back up alarms are functioning properly. 

Keep looking in your mirrors. Every few seconds you should be checking your mirrors. Remember to look and lean to see as much in your mirrors as possible. Stop and let the motorist pass before you begin clearing an intersection, but be aware that some motorists may get confused in these situations and may not react like you think they should. 

Back slowly at first, again, keeping an eye out for anything behind you. Finally, if you are backing and you feel an unusual amount of resistance, or the back end of the truck begins to rise, stop immediately! 

Check traffic so that you’re not going to be struck by a vehicle yourself, and get out and look. 


The most important thing is to be ready! If you operate a snowplow or any other heavy equipment on or near the public right of way, it’s not a matter of if a motorist will come too close to you, it’s a matter of when. So stay alert and be ready. Most of all, remember to drive safely.