Wednesday, April 12, 2017

Chemical Release at MGPI Industries; Investigators Note Insufficient Safety Design Features and Shortcomings in Emergency Shutdown Devices











Today the U.S. Chemical Safety Board released preliminary findings from its ongoing investigation of the toxic chemical release that occurred at the MGPI Processing plant in Atchison, Kansas, on October 21, 2016. The CSB’s investigation into the release has identified several shortcomings in the design and labeling of loading stations, as well as adherence to chemical unloading procedures.

The MGPI facility produces distilled spirits and specialty wheat proteins and starches. The chemical release occurred when sulfuric acid was inadvertently unloaded from a tanker truck into a fixed sodium hypochlorite tank at the plant. The two materials combined to produce chlorine gas that sent over 140 individuals, both workers and members of the public, to area hospitals and resulted in shelter-in-place and evacuation orders for thousands of local residents.

Chairperson Vanessa Allen Sutherland said, “This type of accident is preventable. Our investigation demonstrates all too clearly that complacency with routine practices and procedures can result in severe consequences. A reaction that produced thousands of pounds of a hazardous chemical had the potential be much more serious – the CSB’s aim is to issue clear safety improvements which can be made to similar facilities across the country.”

The CSB’s investigation found that at about 7:35 am, a tanker truck from Harcros Chemicals arrived at the MGPI facility to deliver sulfuric acid. There, a facility operator escorted the driver to a locked loading area. The operator unlocked the gate to the fill lines and also unlocked the sulfuric acid fill line.

The CSB found that the facility operator likely did not notice that the sodium hypochlorite fill line was also already unlocked before returning to his work station. The driver connected the sulfuric acid discharge hose from the truck into the sodium hypochlorite fill line. The line used to transfer sulfuric acid looked similar to the sodium hypochlorite line, and the two lines were located in close proximity.

As a result of the incorrect connection, thousands of gallons of sulfuric acid from the tanker truck entered the facility’s sodium hypochlorite tank. The resulting mixture created a dense green cloud, which traveled northeast of the facility until the wind shifted the cloud northwest towards a more densely populated area of town. The CSB investigation concluded that emergency shutdown mechanisms were not in place or were not actuated from either a remote location at the facility or in the truck. The CSB found a number of design deficiencies that increased the likelihood of an incorrect connection, such as the close proximity of the fill lines, and unclear and poorly placed chemical labels.

In addition, the CSB found that both MGPI and Harcros did not follow internal procedures for unloading operations. CSB Investigator-in-Charge Lucy Tyler said, “Unloading activities occur at thousands of facilities across the country every day. This event should serve to remind industry to review their own chemical unloading operations and work with motor carriers to ensure chemicals are unloaded safely.”

The CSB is an independent, non-regulatory federal agency whose mission is to drive chemical safety change through independent investigations to protect people and the environment. The agency’s board members are appointed by the President and confirmed by the Senate. CSB investigations look into all aspects of chemical incidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards, and safety management systems. For more information, contact public@csb.gov.