July 1, 2015
ISLAND LAKE, Ill. — A 32-year-old machinist suffered
serious injuries to his left arm caused when his hand was caught and he
was pulled into a machine on which his employer had bypassed safety
devices designed to prevent such injuries. The worker has endured
several surgeries and rehabilitation to repair his broken bones.
U.S. Department of Labor Occupational Safety and Health Administration inspectors found that his employer, Kemper Valve & Fittings Corp., bypassed safety devices to allow the computer-controlled machine to operate when the guard door was open.
OSHA identified one willful and one other-than-serious safety violation at the Island Lake manufacturing facility following the March injury. Proposed penalties total $71,000.
"Kemper Valve & Fittings decided to bypass safety devices and put employees at risk for severe injuries. For this worker, that willful choice resulted in a life-altering injury," said Angeline Loftus, area director of OSHA's Chicago North Area Office in Des Plaines. "Employees pay the painful price when companies don't follow safety standards. Each year about 3 million workers in America are injured on-the-job, which affects their ability to provide for themselves and their families."
Investigators found the machinist was using sandpaper to remove surface rust from a part. The door guard of the computer numerical control machine remained open, to make the part accessible. The worker's hand was caught during the machine's rotation, and he was pulled into the rotating parts which resulted in the injuries. OSHA cited a willful violation because the company ignored basic machine safety rules.
The company also failed to create an annual injury and illness summary for each of its separate operating locations, resulting in one other-than-serious violation.
The incident occurred at Kemper Valve & Fittings' manufacturing headquarters.
The company maintains its national sales and service center in Houston and has similar centers in Arkansas, Colorado, Oklahoma, Pennsylvania and Utah.
The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director in Des Plaines, or contest the findings before the independent Occupational Safety and Health Review Commission.
To ask questions, obtain compliance assistance, file a complaint, or report amputations, eye loss, workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the Chicago North Area Office at 847-803-4800.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees.
OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
Machinist needs several surgeries after catching hand
in machine; Kemper Valve & Fittings ignores safety rules
Company faces $71K in fines after OSHA cites 2 violations
in machine; Kemper Valve & Fittings ignores safety rules
Company faces $71K in fines after OSHA cites 2 violations
U.S. Department of Labor Occupational Safety and Health Administration inspectors found that his employer, Kemper Valve & Fittings Corp., bypassed safety devices to allow the computer-controlled machine to operate when the guard door was open.
OSHA identified one willful and one other-than-serious safety violation at the Island Lake manufacturing facility following the March injury. Proposed penalties total $71,000.
"Kemper Valve & Fittings decided to bypass safety devices and put employees at risk for severe injuries. For this worker, that willful choice resulted in a life-altering injury," said Angeline Loftus, area director of OSHA's Chicago North Area Office in Des Plaines. "Employees pay the painful price when companies don't follow safety standards. Each year about 3 million workers in America are injured on-the-job, which affects their ability to provide for themselves and their families."
Investigators found the machinist was using sandpaper to remove surface rust from a part. The door guard of the computer numerical control machine remained open, to make the part accessible. The worker's hand was caught during the machine's rotation, and he was pulled into the rotating parts which resulted in the injuries. OSHA cited a willful violation because the company ignored basic machine safety rules.
The company also failed to create an annual injury and illness summary for each of its separate operating locations, resulting in one other-than-serious violation.
The incident occurred at Kemper Valve & Fittings' manufacturing headquarters.
The company maintains its national sales and service center in Houston and has similar centers in Arkansas, Colorado, Oklahoma, Pennsylvania and Utah.
The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA's area director in Des Plaines, or contest the findings before the independent Occupational Safety and Health Review Commission.
To ask questions, obtain compliance assistance, file a complaint, or report amputations, eye loss, workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742) or the Chicago North Area Office at 847-803-4800.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees.
OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.