MEC&F Expert Engineers

Thursday, May 24, 2018

Emmanuel Gonzalez-Garcia, 20, an asphalt density technician employed by Ajax Paving, which is resurfacing Pontiac Trail from 11 Mile to Silver Lake, was crushed to death after a tar truck owned by Piper Trucking backed over him in suburban Detroit, MI







Construction worker dies when asphalt truck backs over him

May 23, 2018


SOUTH LYON, Mich. (AP) — Authorities say a road construction worker has died after a truck backed over him in suburban Detroit.

South Lyon Police Chief Lloyd Collins says emergency crews attempted for 30 minutes to resuscitate Emmanuel Gonzalez-Garcia following the accident Wednesday morning but were unsuccessful.


The Detroit man worked for Ajax Paving of Troy. The company's CEO, James Jacobs, issued a statement saying it's investigating the incident and extending its sympathies to Gonzalez-Garcia's family.



We are saddened to confirm that Emmanuel Gonzalez-Garcia, Density Technician for Ajax, was fatally injured this morning on one of our job sites. We are at this time investigating the facts surrounding the incident. Our most heartfelt sympathies are with the immediate family and friends as well as our Ajax family of employees.

It is in these difficult times, we look to each other for comfort and support. If anyone needs to talk to someone, please reach out to our Human Resources Department. 
If however you need compensation money, our doors are closed.
Police say a truck full of asphalt was backing up when it struck the worker.  The worker was new at his job.
=====================


Construction worker dies in crash in South Lyon
James David Dickson, The Detroit News 

May 23, 2018



A road construction worker died in a crash at his work site Wednesday morning in South Lyon, police said.

South Lyon fire Chief Robert Vogel said about 10:30 a.m. Wednesday, a truck backed over the victim, who was in his 20s. The truck was carrying tar to the work site at Pontiac Trail and 11 Mile, the Police Department said.

The victim was a contractor for Ajax Paving, which is resurfacing Pontiac Trail from 11 Mile to Silver Lake, said Craig Bryson, a spokesman for the Road Commission of Oakland County.

Company officials issued a statement about the death Wednesday afternoon.

"We are saddened to confirm that an Ajax employee was fatally injured this morning," said James Jacob, the company's CEO, in the statement. "We are at this time investigating the facts surrounding the incident. Our most heartfelt sympathies are with the immediate family and friends as well as the Ajax family of employees."


=====================





Road worker killed by asphalt truck on Pontiac Trail in South Lyon
LeAnne Rogers, hometownlife.com 


May 23, 2018


An accident that killed a construction worker Wednesday morning on Pontiac Trail, north of 11 Mile, in South Lyon is under investigation.

The worker, a 21-year-old Detroit man, was working on a repaving project as a flagger when a semi-truck delivering asphalt backed over him, South Lyon Police Lt. Chris Sovick said.

"(The victim) was checking the pavement density. The semi driver was backing up to put asphalt into the paving machine and didn't see him," Sovick said. "There were no witnesses to the accident. I'm not sure how it was discovered (that the man had been killed)."

The accident happened about 10:30 a.m. When officers responded, Sovick said they had thought the victim had been hit by a motorist. The intersection is closed with South Lyon officers on the scene. The Oakland County Sheriff's Office accident investigation team had been called to the scene for additional investigation.

The repaving project is being done through the Road Commission for Oakland County. The victim was working for the project contractor Ajax Paving. The driver is employed by Piper Trucking, which is based in Warren.

"The companies have been notified. Piper Trucking will be responding and doing drug testing of the driver. The driver was very distraught," Sovick said.

Drivers are advised to avoid the area of Pontiac Trail and Eleven Mile until further notice.

Construction worker Juventino Mata-Hernandez, 24, died after falling 12 stories from the Legacy Union building under construction in the 620 block of South Tryon Street in uptown Charlotte







CHARLOTTE, N.C. - 


A male construction worker died Wednesday afternoon after falling 12 stories from a building under construction in the 620 block of South Tryon Street in uptown Charlotte, officials say.

It happened where the old "The Observer" building once stood. It is now the Legacy Union, which is going to be 33 stories once completed next year.

Officials said the worker was Juventino Mata-Hernandez, 24.

"I would wonder were all the safety precautions taken to make sure something like this didn't happen?” said Gina Johnson, who was staying a nearby hotel. “You hope that they did and, it was just some sort of weird, freak accident and not something that could have been preventable."

The North Carolina Department of Labor is investigating the incident.

Statement from Gilbane Building Company, which is building the skyscraper:

"We are saddened to report that a fatal accident occurred today involving a worker at the Legacy Union construction site.

“We're gathering information on exactly what happened and have no details to share at this time.

We're working closely with the authorities to provide you with more details as they become available.

We extend our deepest condolences to those affected. They are certainly in our thoughts and prayers."  But will not open our pocket book to pay for the loss of this young man.  Thoughts and prayers are free, but money is not.


==========================




HARLOTTE, NC (WBTV) -

A construction worker is dead after falling from a building in uptown Charlotte Wednesday afternoon.

Medic says the incident happened in the 600 block of South Tryon Street.

Officers with the Charlotte-Mecklenburg Police Department say a caller told them that a male construction worker, later identified as 24-year-old Juventino Mata- Hernandez, fell from a building that was under construction.

Hernandez was pronounced dead on the scene.

All eastbound lanes of Stonewall Street were closed temporarily between Church Street and Tryon Street due to the incident. There were delays on the westbound lanes of the street due to on-lookers.

There's no word on what caused him to fall from the building or what led to the incident.

Detectives interviewed witnesses, and the medical examiner’s office will make the final determination on Hernandez's cause and manner of death.

OSHA (Occupational Safety and Health Administration) will conduct a separate investigation.

According to the Charlotte Observer, the building where the incident took place is the former site of the Observer building, where Lincoln Harris is developing a 33-story office tower anchored by Bank of America.

The 640-foot-tall building is expected to open in early 2019, though an exact date hasn't been given.

It's the first phase of a development called Legacy Union that's expected to include shops, restaurants, residences, more office space and hotels.

This is an ongoing, active investigation and anyone with additional information concerning this case is asked to call Crime Stoppers at 704-334-1600.


Twelve homes in Newtown, CT have been condemned due to damage from last week’s storms











Newtown, CT

A dozen homes in Newtown have been condemned due to damage from last week’s storms, according to the first selectman.

First Selectman Daniel Rosenthal confirmed that 10 homes in the Lakeview Terrace area were condemned, and another two in the Lake Zoar area. Some of them may be reconstructed, Rosenthal said.

Newtown was one of several hard-hit towns after tornadoes and powerful downbursts hit the state last week. Thousands of people were without power for days. Eversource estimated that across the state the storm brought down more than 1,900 poles and 300 miles worth of power lines.

In the first days after the storm, tree removal companies were working non-stop.

“Pretty hectic. It’s been – I don’t know how to describe it really. I’ve seen this stuff before, storm damage, but not to this magnitude,” said Rob McCulloch of Newtown Arbor Services in an interview with NBC Connecticut last week.

A week later, there is still much cleanup left in Newtown. As of noon Tuesday, less than 1 percent of town was left without power, but Eversource crews remained in town working to fully restore power and to clean up fluid leaks from transformers damaged in the storm.

Various town facilities have been opened for residents to charge electronics or access water. The transfer station has been open and available for free brush disposal, and dumpsters were made available for residents to throw out spoiled food.

For a full list of resources, visit the Newtown town website here.

Tuesday, May 22, 2018

The explosion and a subsequent blast early the morning of May 2 at the Meridian Magnesium factory in Eaton Rapids, MI occurred because the fire suppression system at the plant added water to molten magnesium. That is like arming a bomb.











Auto parts plant blast: Fire suppression, magnesium acted like a bomb
Phoebe Wall Howard, Detroit Free Press 

 May 21, 2018


An explosion during an auto parts plant fire that ultimately stopped production of the Ford F-150 was so violent that it threw a worker through the air into a door jamb. Vehicles in the parking lot caught fire and were damaged by flying debris. A fire "detector did not alert occupants."

The explosion and a subsequent blast early the morning of May 2 at the Meridian Magnesium factory in Eaton Rapids occurred because the fire suppression system at the plant added water to molten magnesium. Experts said that is like arming a bomb.

Firefighters called to the factory went to the maintenance room "and looked at the bottom of the scrap conveyor (where) we saw a white glow in the tunnel. We exited the plant at that time,” Eaton Rapids Fire Chief Roger McNutt wrote in his official report.

The report, made public Monday, said the plant sustained an estimated $8 million in damage. It makes highly specialized auto parts used in Ford F-Series trucks and several other vehicles. General Motors, Fiat Chrysler, Mercedes and Ford were affected, with F-Series production fully shut down for eight days.


The Michigan Occupational Health and Safety Administration is investigating the incident.

The factory has a history of safety citations since being acquired in December 2013 by Chinese automotive firm Wanfeng Auto Holding Group. The company has been fined a total of $6,700 for violations of standards relating to worker safety around electrical equipment, die-casting machines and industrial trucks, including separate incidents in which employees suffered burns.

On May 2, the fire report said, “We went to the sprinkler system … and found water was flowing through the pipes … We saw the damage from the first explosion on the west side of the building. I called for an engine to come to my location to extinguish some fire in the mechanical room where no magnesium was. We started to get the engine ready, I sent a firefighter to hook to hydrant. This is when the second explosion occurred.”

It was 2:01 a.m.

“After the second explosion it was reported that there were two employees injured, one by debris that was ejected from the plant and the other employee was injured by the blast of the explosion at the south end of the plant by the scrap tunnel ... We did not try to extinguish any fires at the plant because of the molten mag in the area. The roof of the re-melt building caught fire and burned, there were three machines with two crucibles each with ten thousand pounds of molten mag in them.”

An initial cause of the fire has not been determined.

“With the destruction that the second and third explosions caused, it was impossible to find what caused the first explosion,” McNutt told the Free Press Monday. “The second and third explosions were the result of water and molten magnesium. That was observed by myself and employees of the plant after the first alarm was sounded.”

Livonia Fire Capt. Michael Magda, a team leader for the Western Wayne County Hazardous Materials Response Team, said firefighters would usually use Class D extinguishers on magnesium or other metal fires because the powder would smother the oxygen of a fire and eliminate a reaction.

“When you’re adding little drips of water onto a magnesium fire, it’s exploding and exploding, and all that liquid melting metal then gets onto combustible materials like wood, fabric, carpeting, walls. And then that would start on fire,” Magda said.

The worker was thrown through the room because explosion causes a shock wave.

“That’s how a bomb works,” Magda said. “And this is very typical of magnesium. Once the magnesium is ignited, it explodes when water added to it. It’s going to be a very dynamic incident. A very dangerous incident for firefighters and the surrounding community. They were lucky there were no fatalities.”

Rob Mickey, 38, of Sterling Heights was one of many laborers, ironworkers, riggers and operators called into work by Walbridge construction immediately following the fires reported to dispatch at 1:32 p.m.

“There were two 12-hour shifts to begin,” Mickey said. “The wind that first Friday made some difficulties getting to some critical dies. We knew there was an urgency to retrieve the dies from the building so parts could be made elsewhere, but we still needed to proceed with safety in mind and we were able to balance those two.”

The devastation was all-consuming as Ford and other automakers worked with Meridian Magnesium Products of America to get tools off site to try and produce crucial car parts elsewhere.

“The power of the blast blew a large hole in the roof and back wall of the building, but also triggered every safety hatch on the roof of the building, and those had to be closed before some weather hit on Sunday and Monday,” Mickey said. “It was a coordinated team effort.”

Eaton Rapids Fire Chief McNutt said his team simply vacated the plant immediately.

“We didn’t fight any fire up there. Everything happened too quick," he said. “The only thing we did is set the ladder truck up and look at the top of the building. If there’s any mag fires, we don’t fight them. We let people at the shop do it. But this was beyond their control. They simply evacuated.”

Benjamin Wu, chief legal officer and public affairs director for Meridian Magnesium Products of America, said the insurance company is conducting a third-party investigation at the 200,000- square-foot site.

Wu previously defended the company's safety record, noting that it has one of the better safety records in the die-casting industry. “We always try to prevent accidents. In the manufacturing environment, accidents happen,” he told the Free Press earlier this month. “We have high standards for our safety.


============================



Ford F-150 pickup supplier had trail of safety violations before blast hit plant

Phoebe Wall Howard, Nathan Bomey, Justin A. Hinkley and Eric Lacy, USA TODAY Network  May 11, 2018


Ford has temporarily stopped producing its F-150 trucks because it run out of parts after a fire at a key parts supplier for the best-selling vehicle in the U.S. Aleksandra Michalska reports. Newslook



(Photo: Matthew Dae Smith / Lansing State Journal)


The automotive parts factory where an explosion has resulted in the temporary halt in production of the Ford F-150 pickup has a history of recent safety violations, according to public records.

The violations included separate incidents in which employees suffered burns at Meridian Magnesium Products of America in Eaton Rapids, Mich., according to Michigan safety documents.

Of the safety citations at the plant over the last decade, all occurred after the plant was acquired in December 2013 by Chinese automotive firm Wanfeng Auto Holding Group.

The non-unionized plant's safety record is coming under scrutiny after two people were injured and more than 100 employees were evacuated when a fire and multiple explosions rocked the small mid-Michigan community May 2.


The plant has been cited for seven safety violations — three of them serious — since early 2014, according to public records.

Inspections conducted at the company in 2011 and 2012 resulted in no citations, according to Michigan safety records. Those inspections took place before Wanfeng bought the plant.

In recent years, the plant has been found in violation of Michigan Occupational Safety & Health Administration standards relating to worker safety around electrical equipment, die-casting machines and industrial trucks.

The company was fined a total of $6,700 for those violations, records show.

Violations included:

• An employee "was burned on multiple body parts" on Nov. 1, 2016, because the company did not provide "metal shielding to protect employees from inadvertent metal splash during die casting," according to Michigan OSHA records. The company was fined.

• An employee was "burned by an arc flash explosion" on Sept. 28, 2015, and the company was cited "for not requiring employees to wear appropriate protective equipment and for not requiring them to use insulated tools."

• The company received a serious citation for lacking wheel chocks on powered industrial trucks during an inspection Jan. 13, 2014.

Last week's explosion closed the plant. It stopped the flow of parts to Ford, which, in turn, had to indefinitely suspend all production of the F-150. The pickup is the jewel of the F-series lineup, which qualifies as the best-selling vehicle in the U.S. and is a Ford profit king. The pickup is assembled at two Ford plants.

At the same time, production at the Meridian parts plant could be offline for weeks. The plant makes support parts for the pickup's radiators.

Ford has warned the shutdown will have "an adverse impact on the company's near-term" profit. The incident also forced Meridian's other corporate customers, General Motors, Fiat Chrysler and Mercedes-Benz, to adjust production schedules.

Benjamin Wu, chief legal officer and public affairs director for Magnesium Products of America, said the company has one of the better safety records in the die-casting industry. Meridian also operates a factory in Ontario, Canada.

“We always try to prevent accidents. In the manufacturing environment, accidents happen,” Wu said Friday. “We have high standards for our safety. Both facilities have had a long period of time without lost-time incidents. Our Canadian facility went over three years without a single lost-time incident.”

Eaton Rapids Meridian plant manager George Asher said last week that the company followed protocols during the May 2 incident.

"Safety is our primary concern," he said in a statement. "We will provide more information as soon as we are able."

Meridian also had a small fire at the plant about a year ago, but it was contained to one of its molding or casting machines, Abhay (Abe) Vadhavkar, director of manufacturing, engineering and technology at the Center for Automotive Research in Ann Arbor, told the Detroit Free Press last week.

Asked about that incident, Wu said: “You’re injecting molten metal into (a) die. You’re going to have minor incidents.”

Eaton Rapids Fire Chief Roger McNutt said Meridian intends to rebuild and reopen its entire complex in four months. The plant's roof was destroyed when the north end of the main structure caught fire.

Meridian has hired a crew of about 300 to remove charred debris, McNutt said. The southwest end of the plant reopened Tuesday. About 150 of the company's regular employees were working in parts of the building where there was no damage as of Thursday.

Jesus Silva Romero, 36, employed by Arborwell Inc., died after he fell 30 feet from a tree at Stanford West Apartments in Palo Alto, CA











Tree trimmer dies in accident at Stanford housing complex
Cal/OSHA investigates circumstances surrounding fatality at Stanford West Apartments

by Palo Alto Weekly staff / Palo Alto Weekly



A tree worker died while on the job at Stanford West Apartments on Clark Way on May 19, 2018. Image courtesy Google Maps.



A 36-year-old man died while working on trees at a Stanford University housing complex in Palo Alto on Saturday afternoon, Palo Alto fire officials said Monday.

He has been identified as Jesus Silva Romero of San Jose, according to the Santa Clara County Medical Examiner-Coroner's office.

Firefighters responded to a report of an injured worker at Stanford West Apartments at 700 Clark Way around 12:40 p.m., Deputy Fire Chief Geoffrey Blackshire said.

"He had been cutting limbs in a tree" prior to the accident, Blackshire read from a department incident report.

Dispatchers also received a request for a technical rescue that was later canceled when crews pronounced Romero dead at the scene, Blackshire said. Palo Alto police officers also responded and assisted in cornering off the area.

One dispatch report indicated Romero had been in a tree with a chainsaw, Battalion Chief Bobby Davis said. Romero was found laying on the ground next to a tree roughly 30 feet tall and visible from Sand Hill Road.

Stanford West Apartments is a 628-unit residential complex for university faculty and staff on the northwest side of the campus.

The California Division of Occupational Safety and Health is investigating the work-related accident that turned fatal, Cal/OSHA spokesman Luke Brown said. Romero was employed by Arborwell Inc., a tree trimming and maintenance company based out of Hayward.

Cal/OSHA investigators were on scene Saturday looking into the circumstances surrounding the accident. The investigation is expected to take about six months to determine if there were any workplace safety code violations, Brown said.

A search of online Department of Labor records showed the state agency opened five investigations into Arborwell Inc. over the past five years.

The employee was a foreman for Arborwell and died in "climbing-related accident," company spokesman Larry Kamer said in an email Monday night.

"This is the first employee fatality we have ever had in our company's history, and we are shocked and saddened by this terrible tragedy," Kamer said.

Arborwell officials have offered their support to Romero's family and are working with Cal/OSHA and other agencies in the investigation into the accident, according to Kamer.

The company also has grief support services available to colleagues and co-workers, Kamer said. The Fire Department, Cal/OSHA and Kamer didn't provide further details on how the accident played out.