MEC&F Expert Engineers

Friday, March 13, 2015

VOLUSIA HAZMAT TEAM RESPONDS TO CHEMICAL SPILL IN DEBARY. 2K TO 2.5K GALLONS OF CORROSIVES AND OXIDIZERS HAVE BEEN SPILLED




FRIDAY, MARCH 13, 2015 9:15 PM

DEBARY, FLORIDA

The Volusia County Hazmat Team has responded to DeBary after a truck flipped over and spilled chemicals onto the roadway, dispatchers said.

The incident occurred on Dirksen Drive near Mansion Boulevard at about 2:45 p.m. Friday, dispatchers said.

Chris Johnson, who serves as the fire chief in DeBary and Orange City, said the chemicals that spilled were primarily corrosives and oxidizers.

He estimated 2,000 to 2,500 gallons of chemicals spill from containers that were being carried by the truck.

Johnson said no injuries had been reported, but the roadway may be closed for several hours while crews clean up the area.
Source: m.news-journalonline.com

TANKER TRUCK CRASHES ON RABBIT EARS PASS, COLORADO AND SPILLS 42,000 POUNDS OF THE CHEMICAL PESTICIDE TRIAZINE; DRIVER WAS SEVERELY INJURED.






FRIDAY, MARCH 13, 2015

STEAMBOAT SPRINGS, COLORADO

An estimated 42,000 pounds of the chemical triazine spilled from a tanker truck (a semi-truck pulling a tanker truck) Thursday after it rolled over on U.S. Highway 40 on Rabbit Ears Pass.

Clean-up efforts are ongoing.

The highway was closed for over seven hours after the crash, which was reported at 5:05 p.m.

Colorado State Patrol Sgt. Scott Elliott said the driver, Noland Hebert, 59, of Louisiana, sustained serious injuries in the crash that were not thought to be life-threatening. He was taken to Yampa Valley Medical Center and then flown to a hospital on the Front Range. The truck Hebert was driving was registered to Quest Liner, Inc., of Dubuque, Iowa.

According to Colorado State Patrol Sgt. Scott Elliott, a trooper patrolling the area reported the crash about 5 p.m., and Steamboat Springs Fire Rescue firefighters responded to extricate the driver. 

Elliott said the truck driver, Noland Hebert, 59, of Louisiana, sustained serious injuries in the crash and was taken to Yampa Valley Medical Center. The truck Hebert was driving was registered to Quest Liner, Inc., of Dubuque, Iowa.
"The guy was fortunate that he survived the crash," Steamboat Fire Chief Mel Stewart said. "The cab was completely destroyed."

Stewart said the driver was later flown to a hospital on the Front Range.
During the crash, the cab of the tanker separated from the load it was hauling and both parts landed on the side of the road at mile marker 142 at the runaway truck ramp. 

According to a news release issued by Elliott Friday morning, the truck was carrying approximately 42,000 pounds of Triazine, a hazardous liquid chemical, and almost all of the chemical was released when the tank ruptured in the crash.

What caused the tanker to crash was still unknown Friday.  However, tractor trailers can easily rollover when they make a turn due to the liquid load sloshing.  Unless the driver is really careful in negotiating turns, in making maneuvers, in breaking, in going uphill or downhill, etc. a rollover accident will happen as is the case here.  He must have been going at a high speed to have such a severe crash where the cab separated from the trailer.

A hazardous materials crew from the Colorado State Patrol arrived at about 9 p.m. to clean up the spilled chemical. Elliott said local, state, federal environmental and health agencies were notified about the spill.

Routt County Environmental Health Director Mike Zopf said a contractor was at the site Friday assessing the spill. A plan is being developed for cleanup.

Triazine is used in pesticides and is flammable. It is considered a high health hazard, according to documents provided by Zopf. There are potentially health effects if people, fish or wildlife are exposed to the product.  The US EPA considers triazines as possible human carcinogens.

The area where the chemical spilled is in the Harrison Creek drainage that feeds into Lake Catamount and the Yampa River.

With snow melting on the pass, there is some concern that the chemical could travel downstream.

"Any time you have impacts to ground and surface water, that's a significant concern," Zopf said.

He said there are a number of agencies involved in assessing the spill, including the U.S. Forest Service and Colorado Parks and Wildlife. Agencies and downstream users of the water are going to be taking water samples.

Zopf said there have been a number of spills on the pass over the years.
"I'm not aware of any impacts to Lake Catamount or the Yampa River from a spill on the pass," Zopf said.

Contaminated Caulk At Hartford School at 1,940 Times Above the Federal Limit





March 7, 2015


Caulk used in the construction of Clark Elementary School is laden with PCBs and may be a reason why the school’s air is tainted with the hazardous chemical, the district’s consultants said in a report Friday.

Samples taken from the public school revealed PCB levels up to 1,940 times the federal limit, complicating Hartford’s efforts to clear the contamination.

Eagle Environmental, a Plymouth firm, said the January tests were part of an initial review for the district so Hartford can begin a plan “to restore indoor air quality to acceptable limits.” But the results, like a range of clues, confirmed that PCBs are so pervasive in the building that consultants cannot yet pinpoint the exact source polluting the air.

Clark’s paint, fireproofing and air filters were found to contain polychlorinated biphenyls. Even new ceiling tiles installed last summer were contaminated — suggesting that PCB vapors had infiltrated the tiles.

The caulk may be a factor in the indoor air quality, the report stated. Eagle Environmental also raised the possibility that renovation work in summer 2014 could have disturbed materials that contain PCBs, but said any impact on the air “cannot be determined.”

Superintendent Beth Schiavino-Narvaez said the Hartford school board will gather for a special meeting Tuesday to consider authorizing her proposal for a remediation plan. Narvaez would then submit the project to the city’s school building committee for action.


The district estimates that it has spent about $40,000 so far on PCB testing at Clark, a prekindergarten to grade 8 neighborhood school. About 350 Clark students were moved to three other city schools in mid-January after the toxic chemicals — known carcinogens that are a risk factor for a host of other long-term health effects — were found as workers prepared to install a fire sprinkler system.

Tests revealed airborne PCB levels above federal public health guidelines for schoolchildren. School administrators say the Clark cleanup could take a year.
“The remediation process will include the state and federal agencies with regulatory oversight for such projects,” Narvaez said in a statement Friday. “This process has not been easy for our school community. My top priority continues to be to provide a safe and healthy learning environment for our students, staff and our families.”

Clark’s 104,000-square-foot school building was constructed in 1971, a time when PCBs were used in caulk and other commercial products before the U.S. banned production of the chemicals later that decade. The Environmental Protection Agency, which has advised Hartford on Clark, has warned that schools built between 1950 and 1979 could have PCBs.

And when caulk and other building materials are found to have PCB concentrations exceeding 50 parts per million, that triggers strict rules under the federal Toxic Substances Control Act. The EPA requires special cleanup and disposal of the hazardous waste.

At Clark, the PCBs in the window caulk ranged from 41,000 parts per million in the principal’s office to 97,000 ppm in Room 223. Caulk in the school entrance door frame tested at 79,000 ppm.

Robert Herrick, a senior lecturer in the environmental health department at Harvard’s School of Public Health, said such high levels are not uncommon when PCBs are found in caulk.

“When you have levels that are that high in the caulk, it wouldn’t be surprising at all that you have correspondingly high air levels, too,” Herrick, who has studied PCB contamination in schools and public buildings, said Friday.
Eagle Environmental’s report said PCBs were found in Clark’s air filters and in spray-applied fireproofing, which is near the school’s air handling system. In those areas, the PCB levels were below the federal limit, but exceeded the state’s regulations and will need to be remediated.

The Clark contamination appears to be the most extensive case of PCBs detected in a Hartford school to date.

Records from the state Department of Energy and Environmental Protection, which has identified more than 100 school buildings statewide that have reported PCB issues, show that Hartford’s Simpson-Waverly School, Global Communications Academy, M.D. Fox, Bellizzi, the former Barbour School and West Middle School needed some form of PCB remediation in recent years.
PCB samples were taken as school renovations got underway. For state-reimbursed projects, districts are now required to test for hazardous materials in areas of the building that will be worked on.

At Simpson-Waverly, where Clark students in a special-education program have been relocated, it was a 2012 window replacement project that turned up low concentrations of PCBs in window glazing, records show.

The district indicated Friday that Simpson-Waverly’s PCB testing was limited to the window area.

Massive overhauls at M.D. Fox and the former Quirk Middle School, now the home of Global Communications, uncovered caulk in 2011 with PCB levels above the federal limit. The cleanup and disposal plans for both schools required EPA approval.

That same year, minor PCB remediation was planned for Bellizzi in the city’s South End and the 1950 section of the Barbour School building across town, state records show. That Barbour section was demolished as part of the $37.45 million project to create the new Journalism and Media Academy.

And in 2013, as West Middle was being prepped for demolition work and its ongoing renovation, an inspection found PCB levels exceeding state regulations in the paint, flooring and other areas, according to a notice received by DEEP.
Andrea Johnson, president of the Hartford Federation of Teachers, said Friday that she had not been informed of past PCB remediation in other city schools. With the Clark case alone, she said, there is “great concern” among teachers about potential health hazards.

State public health officials have tried to assure school employees and parents that the elevated PCB levels in Clark’s air do not pose a health risk, although that assessment has drawn skepticism.

Johnson called on the district to proactively test other Hartford schools.
“Everybody’s life is important,” she said. “If there’s something in there that’s going to be hazardous to anybody, it needs to be taken care of.”

Jury Finds an Engineering Firm (Hardesty & Hanover), a Supplier and a Contractor (Conway Construction) at Fault for Defective Decking in Oregon Bridge. County Responsible for 22 percent of the Negligence.

March 6, 2015
 


Multnomah County taxpayers will recoup the money spent on the Morrison Bridge decking that fell apart shortly after it was installed, a jury decided Friday.
Jurors, after an 11-day trial, awarded the county $4.4 million in its lawsuit against the contractor and subcontractors.

At the same time, the jury said the county shares some of the blame. Jurors found the county suffered $5.6 million in damages but that it was responsible for 22 percent of the negligence. The jury reduced the county’s award by that percentage.

Supplier ZellComp Inc. of North Carolina was ordered to pay 40 percent, or $2.3 million ; engineering firm Hardesty & Hanover of New York 21 percent, or $1.2 million ; and contractor Conway Construction Co. of Washington , 17 percent, or $959,990 .

Strongwell Corp. of Virginia — the manufacturer, which county attorneys said was most at fault — won’t have to pay anything.

County Chairwoman Deborah Kafoury , in a statement, called the verdict “a great outcome for the citizens of Multnomah County .”

“We are ultimately responsible for maintaining a safe bridge for the public’s use, and we take that job seriously,” Kafoury said in the statement. “When contracting with professionals to do work for us, we have high expectations that they will perform the work they were contracted to do.”


Douglas Weigel , Conway’s attorney, said he was disappointed, but that his client accepts the verdict and will move on with its work building roads and bridges.

“I think Conway will be reluctant to use a similar type of system on any project in the future,” Weigel said.

Daniel Nichols , ZellComp’s attorney, declined to comment. Attorneys for Strongwell said only that they were pleased.

Mike Pullen , county spokesman, said the county is done trying new products such as the fiber-reinforced decking used on the Morrison. The challenge now is finding material that will weigh about the same as the bridge’s counterweight used to open the bridge.

Concrete alone is too heavy, Pullen said. The original steel grating on the 57-year-old bridge became too slippery when wet, leading to accidents, some fatal.

Pullen said Friday the county is considering using steel grating with a layer of concrete on top.

“We want to choose a material that we know will last a long time,” Pullen said. 

“We need to act quickly because of the deterioration of the existing deck, but we want to go with something tried and true.”

Welding Rod Fumes Can Cause Manganism / Parkinson’s Disease


Welder’s Disease / Manganism is a chronic disorder of the central nervous system. The manganism is similar to Parkinson’s Disease, and may include slow and clumsy movements, tremors, shakes, weakness, difficulty breathing, loss of coordination and slurred speech. Manganism or parkinsonism develops after years of exposure to welding fumes containing manganese. Unfortunately, OSHA does not presently require that special ventilation or respirators be provided when manganese fumes are encountered during welding.

Welding smoke or welding rod fumes is a mix of fine particles and gases; many of the welding rod particles, include arsenic, asbestos, manganese, carbon monoxide and lead. These toxic fumes and welding rod gases may come from any of the elements in the process, including the material being welded, the filler material used in brazing or soldering, or coatings and paints on the metal being welded.



There are welding industry regulations requiring specific safety measures to prevent injury to welders from welding rod fumes. Proper welding rod ventilation is essential to protect welders from excessive welding rod fumes. Welding in closed spaces also requires the use of a self-contained breathing equipment. If there is any cancer-causing substance present in the air, respirators must be provided and welders and others must be properly trained in their use.

Because there are so many harmful substances in welding rod fumes, it is difficult to list all possible side effects. Some of the components can be fatal in a short time, such as phosgene gas and cadmium. Other welding rod fumes may only create short-term stomach ailments or breathing problems. Long-term side effects can include lung cancer, other lung problems, heart disease and skin disease.

Manganism is caused by exposure to high levels of manganese. Manganese is a naturally occurring substance found in many types of rock. Pure manganese is a silver-colored metal, somewhat like iron in its physical and chemical properties. Manganese does not occur in the environment as the pure metal. Rather, it occurs combined with other chemicals such as oxygen, sulfur, and chlorine. These compounds are solids that do not evaporate. However, small dust particles of the solid material can become suspended in air. Some manganese compounds can dissolve in water, and low levels of these compounds are normally present in lakes, streams, and the ocean. Manganese can change from one compound to another (either by natural processes or by man’s activities), but it does not break down or disappear in the environment. Welding rods consists of metal coated with or containing manganese, zinc, cadmium, chromium, copper, fluoride, lead, or vanadium, because the resulting fumes can cause a condition commonly known as metal-fume fever. This condition may in fact be more serious than the name metal fume fever or welders sickness or welders disease, it may be early stages of Parkinson’s Disease or Manganism.

Welding Rod Manganese
Rocks containing high levels of manganese compounds are mined and used to produce manganese metal. This manganese metal is mixed with iron to make various types of steel. Some manganese compounds are used in the production of batteries, as an ingredient in some ceramics, pesticides, and fertilizers, and in dietary supplements. Miners, welders, pesticides workers and fertilizer workers, making certain types of batteries, ceramic workers, and workers in steel production are at risk for manganism.

Too much manganese, however, can cause serious illness. Although there are some differences between different kinds of manganese, most manganese compounds seem to cause the same effects. Manganese miners or steel workers exposed to high levels of manganese dust in air may have mental and emotional disturbances, and their body movements may become slow and clumsy. This combination of symptoms is a disease called manganism. Workers usually do not develop symptoms of manganism unless they have been exposed for many months or years. Manganism occurs because too much manganese injures a part of the brain that helps control body movements. Some of the symptoms of manganism can be reduced by medical treatment, but the brain injury is permanent. There are reports that patients have developed symptoms several years after exposure to manganese had ceased. Manganism is a permanently disabling disease for which there is no cure.

Welding Rod Fume – Manganism Symptoms
Tremors or Shakes
Slowed movement
Slurred speech or slow speech
Stiffness in arm and leg muscles

Decreased hand agility
Depression
Difficulty walking
Distorted facial expression
Increased irritability
Joint pain
Loss of equilibrium (balance)
Loss of short term memory Sinus problems
Slowed movement
Sudden and/or severe mood changes
Tremors


Welding Rod Parkinsonism Symptoms
Slowness of movement;
Poor balance. Particularly during abrupt movement;
Repeated falls due to loss of balance and fainting or lightheadedness;
Walking problems;
Dizziness,
Sleep disturbances,
Stooped posture
Problems with speech, breathing, and swallowing
Short, shuffling steps; and
Difficulty turning.
Tremors ( arms, legs, head, neck, and face;
Rigidity (increased stiffness in the muscles);
Pain, especially in the arms and shoulders;
Depression,
Problems with speech, breathing, and swallowing
Short, shuffling steps; and
Difficulty turning.