Wednesday, September 13, 2017

Construction worker Wilfredo Hernandez's throat was cut when a chainsaw he was using kicked up during Hurricane Irma cleanup






Man accidentally killed by chainsaw while helping clean up Irma debris

September 12, 2017




HILLSBOROUGH Co., Fla. - A man was accidentally killed by a chainsaw Monday while helping a neighbor cut tree branches during Hurricane Irma cleanup.

It happened at 5115 Town N Country Blvd.

Authorities say a branch became entangled with the chainsaw. It kicked up and cut Wilfredo Hernandez' throat.

Hillsborough County Fire Rescue responded and used a harness to lower him from the tree, but he was pronounced dead at the scene.


======================



Town 'N Country man helping with Irma cleanup dies in chain saw accident


Dan Sullivan, Times Staff Writer

Tuesday, September 12, 2017 6:30pm





TAMPA — Rodrigo Martinez knelt before a hole in the black, weed-choked earth. A heavy log lay near him, freshly severed from the towering branches. He cradled the burly wood, its bark stained with droplets of red.


"Brother, I'm with you," he said. "You know that. Your blood is my blood."

He placed the log in the hole, dug at the exact place where, a day earlier, his friend Wilfredo Hernandez came to rest after firefighters lowered his body from the tree.

Hernandez became the only known local casualty of Hurricane Irma, but not until after the storm wreaked havoc on Tampa Bay.

The 55-year-old construction worker was helping Martinez, a close friend and neighbor on their Town 'N Country street, trim the tangled branches that swayed through power cables in his back yard.

Hernandez stood high atop the tree late Monday afternoon. Martinez and neighbors in an adjacent yard watched as he pressed a chain saw into the wood.

The blade became stuck in a branch, they later told Hillsborough sheriff's deputies. As Hernandez pulled, the chain saw kicked back and tore into his neck, cutting through his jugular vein and carotid artery, according to a medical examiner report.

Firefighters and deputies arrived at the home at 5115 Town 'N Country Blvd. and used a harness to lower him. He was dead.

On Tuesday afternoon, Martinez stood with two other men, sweating in the hot sun, amid shrubs and grass and tangled vines.

He held up a knotted stick — two small branches marked with blood forking off a larger severed piece, and thin vine jutting out from the end. He tugged the vine with his fingers.

"This is what killed him," he said, "this little piece right here."

He and Hernandez had been friends for several years, he said. They lived in the working-class, mostly Hispanic neighborhood northwest of the city, where residents looked out for one other.

They boarded up when the storm approached. When it was over, they thought they had escaped unscathed. Some saw the accident as it happened. Others had heard about it. Few wanted to talk about it. Hernandez was a father of three adult children who live in Cuba.

The authorities carried away his body, but there were bloody reminders everywhere Tuesday.

With spare words exchanged in Spanish, Martinez and another man, Sergio Rodriguez, dug the hole near the base of the tree.

"We're going to take it down," Martinez said, "And bury him where he fell."

Rodriguez ascended a ladder against the tree trunk. He stepped high to the place where Hernandez had fallen.

He used a handheld blade to saw. Wood dust rained down past a white fence that was stained with red.

Rodriguez put the saw aside and grabbed a machete that had been placed in the wood. He raised the blade and swung, striking the branch again and again.

Thwack-thwack-thwack.

Martinez noted the date his friend had died — Sept. 11. He said he used to work in New York and knew many who perished that day 16 years ago.

"What do you call that?" he said. "Coincidence? Destiny?"

The log dangled, then fell.

Rodriguez picked up a shovel and stabbed at the wood.

The men gathered the fallen branches and foliage and filled the hole. They ran a garden hose from next door.

Martinez sprayed the cool running water. The red spots dissolved and trickled to the ground, flowing over mud and into the hole. He removed his white T-shirt and used it to wipe a fence.

He stopped, and he sobbed.



=================


Chainsaw kickback is a very common thing during working process. It usually occurs when chainsaw is handled not properly or carefully. This coward thing occurs if you hit the kickback zone on your bar. After this the chain grips the timber in this area. Then chainsaw goes back to you, more particularly to your face. The power of inertia can make bad injures. This direction occurs because of the rotating chain. The kickback zone is the upper half of the tip. Don’t use this area for cutting something, cause the possibility of kickback is very high. Pay attention to this zone every time you use chainsaw. Producers make everything to prevent users from kickback. Nevertheless, users should also follow several simple rules to avoid kickback during work. You should be ready to follow these rules and perform tasks as carefully as possible. 




The most dangerous bar area

First of all, keep your hands on the instrument. Grip rear and front handles solidly, cause it’s the basic rule. Operator should control all motions of the instrument. Always use proper stances and approved cutting techniques. There is plenty of information about these things, so study and use them. The nose of your guide bar shouldn’t be put against the wood. Make a proper plan of cutting in your mind and try to perform it with your chainsaw without starting it. Always use sharpened chain, cause dull one leads to the greater possibility of kickback. Tighten your chain properly before using it, don’t forget to do this regularly. Using of protection gear is a must, but you of course know about this tip. And the last thing is your fear of kickback. You should be always cold-blooded while starting the work. 


Protection from producers


Bar tip guard

The best thing you can do is to use Oregon chains in order to minimize the risks. All producers approve these chains, cause they are anti kickback ones. Inertia activated brakes are also were created to protect you. Manual brakes have the same purpose. Some producers use bar tip guards in order to make the working process as safe as possible. Always check your chain and bar for wear, cause these things can also lead to dangerous things.



Every single chainsaw is the source of increased danger. These instruments remain one of the most dangerous ones. Proper handling won’t lead to dangerous things during working process. The majority of injures happen because of users, who are not attentive enough or don’t follow the above-mentioned rules. Take these tips into consideration and you’ll save your health.