Wednesday, December 28, 2016

G.D. Roberts & Co. Inc. fined $120K for safety failures after investigation of teenaged worker’s fatal injuries, two weeks after starting job

OSHA cites Wisconsin metal fabrication company for safety failures after investigation of teenaged worker’s fatal injuries, two weeks after starting job


COLUMBUS, Wis. – A federal investigation prompted by the death of a 17-year-old worker at a Columbus metal fabrication facility has resulted in multiple safety and health violations.

The U.S. Department of Labor’s Occupational Safety and Health Administration has issued 16 serious and one other-than-serious safety and health violations to G.D. Roberts & Co. Inc., for violations the agency’s inspectors found after a machine pinned and injured the teenaged worker on June 27, 2016. He died of his injuries on July 2, 2016.

“A young man suffered a tragic death shortly after starting a new job, leaving his family to grieve their overwhelming loss,” said Ann Grevenkamp, OSHA’s area director in Madison. “Proper lockout devices along with training could have prevented this tragedy.”

Investigators determined the worker was clearing scrap below a loading table for an operating laser-cutter system when the machine lowered onto the victim, trapping him beneath. OSHA found that the company failed to ensure procedures to lockout the machine to prevent unintentional movement were followed, and did not train its employees properly in such safety procedures.

The agency also found G.D. Roberts failed to:
  • Conduct periodic inspections of machine safety procedures.
  • Affix lockout devices to isolate energy prior to allow employees to enter machine hazard areas.
  • Conduct noise monitoring.
  • Provide employee’s audiograms.
  • Train workers about noise hazards.
  • Follow respiratory protection standards such as fit-testing, training and medical evaluations for employees.
  • Evaluate for airborne hazards.
  • Implement engineering controls for dust and other airborne hazard exposure resulting in employee overexposure.
  • Maintain chemical inventories.
  • Train workers in forklift operation.
  • Seek manufacturer approval prior to modifying forklifts.
  • Train employees about chemicals in use in the workplace and maintain a chemical inventory.

OSHA has proposed penalties of $119,725. View current citations here.

The company fabricates metal trailers and has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

To ask questions, obtain compliance assistance, file a complaint, or report amputations, eye loss, workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA’s toll-free hotline at 800-321-OSHA (6742) or the agency’s Madison Area Office at 608-441-5388.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to ensure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
OSHA News Release:
12/27/2016