Friday, July 3, 2015

CONSTRUCTION WORKER FALLS 14 FEET FROM A BEAM ONTO CONCRETE AND SUFFERS SERIOUS BRAIN INJURY









On May 12, 2014, a 41- year-old construction worker suffered a severe traumatic brain injury when he fell approximately 14 feet and hit his head on the concrete below. 

The incident occurred at a new multi-family home construction site. The injured worker had only worked for two weeks for the employer, a small construction company that provided framing and carpentry services. 

He had been installing floor trusses on the second story above the garage of a multi-family home under construction at the time of the incident. The foreman and another employee were standing about 100 feet away in front of the building when they heard a noise and responded. 

They found the injured worker lying on the concrete, breathing but barely conscious. He was still connected to the rope and harness of his fall arrest system, which was anchored to a beam next to the garage.

 Although the injured worker was wearing fall protection, there had been too much slack in the rope, and it was not able to stop his fall. 

The foreman had warned him about having too much slack in the rope one week before the incident. 

He was taken to the hospital where he was found to have multiple skull fractures, brain hemorrhaging, and a spinal fracture. 

He underwent emergency surgery to relieve brain swelling. Nearly a year later, the injured worker is still in rehabilitation for his brain injuries and requires 24-hour-a-day living assistance.

 Requirements
Make sure the appropriate fall protection system is provided, installed, and implemented according to requirements when employees are exposed to fall hazards of ten feet or more to the ground or lower level while working on any surface that does not meet the definition of a walking/working surface.

See WAC 296-155-24611(1)(c)
Develop and implement a written fall protection work plan that includes each area of the work place where the employees are assigned and where fall hazards of ten feet or more exist.

See WAC 296-155-24611(2).
Provide retraining for employees exposed to fall hazards when inadequate use indicates that they have not retained the knowledge of how to use fall protection systems safely. See WAC 296-155-24621.

Recommendations
Consider using aerial work platforms or scaffolds to reduce the risk of falls when installing trusses, rather than having workers stand on the beam edge.
Reduce exposure to falls by placing and securing plywood over the already installed trusses to create a walking/working surface to which an anchor can be secured for a personal fall restraint system.